BX4AEW-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BX4AEW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	ALL_PKTS_10M*	FWD_APRS_10M*	POS_PKTS_10M*	MSG_PKTS_10M*	CTRL_PKTS_10M*
1761471602	32 cnt	0 cnt	24 cnt	3 cnt	5 cnt
1761464402	49 cnt	1 cnt	34 cnt	5 cnt	10 cnt
1761460802	63 cnt	14 cnt	40 cnt	10 cnt	13 cnt
1761457802	54 cnt	7 cnt	41 cnt	6 cnt	7 cnt
1761457202	51 cnt	8 cnt	46 cnt	2 cnt	3 cnt
1761456002	46 cnt	10 cnt	35 cnt	5 cnt	6 cnt
1761455402	51 cnt	14 cnt	41 cnt	1 cnt	9 cnt
1761454802	46 cnt	6 cnt	35 cnt	4 cnt	7 cnt
1761454202	51 cnt	3 cnt	38 cnt	8 cnt	5 cnt
1761453602	46 cnt	1 cnt	35 cnt	7 cnt	4 cnt
1761453002	57 cnt	3 cnt	41 cnt	6 cnt	10 cnt
1761452402	34 cnt	2 cnt	31 cnt	0 cnt	3 cnt
1761451802	51 cnt	0 cnt	42 cnt	2 cnt	7 cnt
1761451202	44 cnt	2 cnt	36 cnt	1 cnt	7 cnt
1761450002	45 cnt	2 cnt	40 cnt	1 cnt	4 cnt
1761449401	37 cnt	0 cnt	34 cnt	1 cnt	2 cnt
1761448801	35 cnt	2 cnt	30 cnt	0 cnt	5 cnt
1761447001	38 cnt	3 cnt	35 cnt	0 cnt	3 cnt
1761446401	59 cnt	8 cnt	46 cnt	5 cnt	8 cnt
1761445801	33 cnt	6 cnt	28 cnt	1 cnt	4 cnt
1761445201	34 cnt	4 cnt	31 cnt	0 cnt	3 cnt
1761436201	36 cnt	0 cnt	31 cnt	1 cnt	4 cnt
1761435601	31 cnt	3 cnt	27 cnt	0 cnt	4 cnt
1761435001	36 cnt	0 cnt	30 cnt	1 cnt	5 cnt
1761434401	33 cnt	3 cnt	26 cnt	1 cnt	6 cnt

*Used Equation Coefficients:

ALL_PKTS_10M: 0, 1, 0

FWD_APRS_10M: 0, 1, 0

POS_PKTS_10M: 0, 1, 0

MSG_PKTS_10M: 0, 1, 0

CTRL_PKTS_10M: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)