KE4HGP-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KE4HGP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1773251944	90 Pkts	82 Pkts	46 Pkts	19 C
1773248344	107 Pkts	97 Pkts	51 Pkts	19 C
1773244744	97 Pkts	89 Pkts	37 Pkts	18 C
1773241144	135 Pkts	126 Pkts	55 Pkts	18 C
1773237544	190 Pkts	183 Pkts	73 Pkts	18 C
1773233943	202 Pkts	197 Pkts	62 Pkts	18 C
1773230344	254 Pkts	245 Pkts	86 Pkts	18 C
1773226744	213 Pkts	205 Pkts	85 Pkts	18 C
1773223144	169 Pkts	160 Pkts	65 Pkts	18 C
1773219544	142 Pkts	133 Pkts	57 Pkts	19 C
1773215944	132 Pkts	124 Pkts	51 Pkts	19 C
1773212344	103 Pkts	95 Pkts	37 Pkts	18 C
1773208750	137 Pkts	130 Pkts	40 Pkts	18 C
1773205143	123 Pkts	115 Pkts	34 Pkts	18 C
1773201544	117 Pkts	109 Pkts	36 Pkts	19 C
1773197943	101 Pkts	93 Pkts	36 Pkts	19 C
1773194344	105 Pkts	97 Pkts	38 Pkts	19 C
1773187144	81 Pkts	73 Pkts	31 Pkts	19 C
1773183544	78 Pkts	70 Pkts	28 Pkts	19 C
1773179944	78 Pkts	71 Pkts	29 Pkts	18 C
1773176344	72 Pkts	65 Pkts	30 Pkts	19 C
1773172744	124 Pkts	118 Pkts	32 Pkts	19 C
1773169144	114 Pkts	107 Pkts	36 Pkts	19 C
1773165544	101 Pkts	93 Pkts	34 Pkts	19 C
1773161948	146 Pkts	137 Pkts	52 Pkts	18 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)