KG4BGI-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KG4BGI-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1761563403	34 Pkts	30 Pkts	10 Pkts	14 C
1761559802	59 Pkts	58 Pkts	10 Pkts	14 C
1761556202	80 Pkts	76 Pkts	14 Pkts	14 C
1761552602	64 Pkts	59 Pkts	15 Pkts	14 C
1761549002	81 Pkts	79 Pkts	16 Pkts	14 C
1761545402	104 Pkts	100 Pkts	16 Pkts	14 C
1761541802	104 Pkts	100 Pkts	28 Pkts	14 C
1761538202	101 Pkts	89 Pkts	19 Pkts	14 C
1761534602	108 Pkts	104 Pkts	17 Pkts	15 C
1761531002	96 Pkts	92 Pkts	19 Pkts	14 C
1761527402	79 Pkts	75 Pkts	16 Pkts	15 C
1761513002	89 Pkts	85 Pkts	24 Pkts	16 C
1761509402	86 Pkts	82 Pkts	19 Pkts	16 C
1761498603	96 Pkts	92 Pkts	30 Pkts	16 C
1761477002	101 Pkts	97 Pkts	24 Pkts	14 C
1761462603	74 Pkts	70 Pkts	14 Pkts	15 C
1761451802	114 Pkts	111 Pkts	21 Pkts	15 C
1761430203	91 Pkts	87 Pkts	27 Pkts	15 C
1761426602	106 Pkts	102 Pkts	31 Pkts	15 C
1761419403	119 Pkts	115 Pkts	42 Pkts	15 C
1761412202	118 Pkts	116 Pkts	28 Pkts	14 C
1761383407	48 Pkts	44 Pkts	12 Pkts	12 C
1761379803	76 Pkts	74 Pkts	19 Pkts	13 C
1761376203	80 Pkts	76 Pkts	23 Pkts	13 C
1761372602	76 Pkts	72 Pkts	20 Pkts	13 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)