OK1ALX-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK1ALX-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPUtemp*	CPUload*	freeRAM*	uptime*	CAMrst*
1765930683	29 deg.C	62 %	40 %	37 days	31 times
1765930083	29 deg.C	47 %	40 %	37 days	31 times
1765928876	29 deg.C	64 %	36 %	37 days	31 times
1765928276	29 deg.C	49 %	40 %	37 days	31 times
1765927685	28 deg.C	59 %	42 %	37 days	31 times
1765926476	29 deg.C	46 %	37 %	37 days	31 times
1765925276	29 deg.C	67 %	39 %	37 days	31 times
1765924676	29 deg.C	64 %	39 %	37 days	31 times
1765923476	29 deg.C	62 %	39 %	37 days	31 times
1765922876	29 deg.C	48 %	39 %	37 days	31 times
1765921676	29 deg.C	59 %	37 %	37 days	31 times
1765921076	29 deg.C	64 %	37 %	37 days	31 times
1765919877	29 deg.C	57 %	36 %	37 days	31 times
1765919276	29 deg.C	48 %	36 %	37 days	31 times
1765918077	29 deg.C	55 %	37 %	37 days	31 times
1765917477	29 deg.C	52 %	36 %	37 days	31 times
1765916277	29 deg.C	57 %	36 %	37 days	31 times
1765915677	29 deg.C	49 %	36 %	37 days	31 times
1765914476	29 deg.C	61 %	36 %	37 days	31 times
1765913877	29 deg.C	68 %	37 %	37 days	31 times
1765912677	29 deg.C	71 %	37 %	37 days	31 times
1765912077	29 deg.C	51 %	36 %	37 days	31 times
1765910876	29 deg.C	57 %	37 %	37 days	31 times
1765910277	29 deg.C	58 %	36 %	37 days	31 times
1765909077	29 deg.C	63 %	37 %	37 days	31 times

*Used Equation Coefficients:

CPUtemp: 0, 0.5, -25

CPUload: 0, 0.5, -25

freeRAM: 0, 0.5, -25

uptime: 0, 1, 0

CAMrst: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)