AI7IC-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AI7IC-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1761483670	181 Pkts	170 Pkts	44 Pkts	25 C
1761476470	204 Pkts	197 Pkts	46 Pkts	25 C
1761472870	198 Pkts	188 Pkts	45 Pkts	25 C
1761465670	171 Pkts	162 Pkts	34 Pkts	26 C
1761462070	179 Pkts	171 Pkts	42 Pkts	26 C
1761458470	174 Pkts	164 Pkts	45 Pkts	25 C
1761451270	179 Pkts	170 Pkts	45 Pkts	26 C
1761447670	209 Pkts	203 Pkts	76 Pkts	26 C
1761444070	217 Pkts	210 Pkts	59 Pkts	26 C
1761440470	283 Pkts	274 Pkts	66 Pkts	27 C
1761436870	193 Pkts	182 Pkts	45 Pkts	27 C
1761433270	316 Pkts	310 Pkts	123 Pkts	26 C
1761429670	298 Pkts	288 Pkts	137 Pkts	26 C
1761426055	276 Pkts	268 Pkts	111 Pkts	27 C
1761422455	280 Pkts	273 Pkts	123 Pkts	27 C
1761418855	247 Pkts	231 Pkts	86 Pkts	26 C
1761415254	313 Pkts	304 Pkts	118 Pkts	26 C
1761411654	207 Pkts	202 Pkts	58 Pkts	26 C
1761408054	229 Pkts	223 Pkts	65 Pkts	26 C
1761404454	208 Pkts	202 Pkts	57 Pkts	25 C
1761400855	188 Pkts	181 Pkts	37 Pkts	24 C
1761397255	170 Pkts	160 Pkts	43 Pkts	24 C
1761393655	167 Pkts	158 Pkts	38 Pkts	24 C
1761390053	176 Pkts	168 Pkts	37 Pkts	25 C
1761386454	158 Pkts	151 Pkts	29 Pkts	25 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)