E22KKC-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E22KKC-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1785337302	4 Pkt	0 Pkt	0 Pkt	-41 dBm	0.9 V
1785336325	95 Pkt	0 Pkt	0 Pkt	-43 dBm	0.88 V
1785334496	73 Pkt	0 Pkt	5 Pkt	-45 dBm	0.84 V
1785332667	57 Pkt	0 Pkt	1 Pkt	-45 dBm	0.88 V
1785330839	68 Pkt	1 Pkt	4 Pkt	-47 dBm	0.66 V
1785329011	86 Pkt	0 Pkt	9 Pkt	-46 dBm	0.76 V
1785327204	58 Pkt	0 Pkt	12 Pkt	-46 dBm	0.86 V
1785325356	73 Pkt	0 Pkt	33 Pkt	-46 dBm	0.76 V
1785323529	70 Pkt	0 Pkt	35 Pkt	-47 dBm	0.84 V
1785321701	64 Pkt	0 Pkt	59 Pkt	-46 dBm	0.86 V
1785319873	80 Pkt	0 Pkt	24 Pkt	-46 dBm	0.64 V
1785318046	52 Pkt	0 Pkt	26 Pkt	-47 dBm	1.03 V
1785316219	71 Pkt	1 Pkt	43 Pkt	-47 dBm	0.84 V
1785314390	72 Pkt	0 Pkt	44 Pkt	-44 dBm	0.64 V
1785312563	69 Pkt	0 Pkt	20 Pkt	-44 dBm	0.74 V
1785310733	74 Pkt	0 Pkt	22 Pkt	-46 dBm	0.84 V
1785308904	66 Pkt	0 Pkt	16 Pkt	-46 dBm	0.62 V
1785307078	4 Pkt	0 Pkt	0 Pkt	-47 dBm	0.86 V
1785305893	61 Pkt	0 Pkt	4 Pkt	-47 dBm	0.64 V
1785304066	3 Pkt	0 Pkt	0 Pkt	-46 dBm	0.66 V
1785303264	75 Pkt	0 Pkt	14 Pkt	-46 dBm	0.66 V
1785301437	69 Pkt	0 Pkt	8 Pkt	-46 dBm	0.82 V
1785299610	65 Pkt	0 Pkt	9 Pkt	-47 dBm	0.86 V
1785297782	61 Pkt	0 Pkt	7 Pkt	-45 dBm	0.74 V
1785295956	42 Pkt	0 Pkt	4 Pkt	-47 dBm	0.86 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)