E22KKC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E22KKC-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1772944881	11 Pkt	0 Pkt	1 Pkt	-49 dBm	3.59 V
1772943055	6 Pkt	0 Pkt	1 Pkt	-48 dBm	3.59 V
1772941230	5 Pkt	0 Pkt	0 Pkt	-49 dBm	3.59 V
1772939405	7 Pkt	0 Pkt	0 Pkt	-48 dBm	3.59 V
1772937580	5 Pkt	0 Pkt	0 Pkt	-49 dBm	3.59 V
1772935754	6 Pkt	0 Pkt	0 Pkt	-50 dBm	3.59 V
1772933929	4 Pkt	0 Pkt	1 Pkt	-52 dBm	3.73 V
1772932104	8 Pkt	1 Pkt	1 Pkt	-51 dBm	3.59 V
1772930278	13 Pkt	0 Pkt	0 Pkt	-50 dBm	3.59 V
1772928453	10 Pkt	0 Pkt	0 Pkt	-51 dBm	3.59 V
1772926627	27 Pkt	0 Pkt	0 Pkt	-50 dBm	3.59 V
1772924802	18 Pkt	0 Pkt	0 Pkt	-51 dBm	3.59 V
1772922975	8 Pkt	0 Pkt	0 Pkt	-50 dBm	3.59 V
1772921150	17 Pkt	0 Pkt	1 Pkt	-49 dBm	3.59 V
1772919324	17 Pkt	0 Pkt	1 Pkt	-51 dBm	3.59 V
1772917499	25 Pkt	0 Pkt	0 Pkt	-50 dBm	3.59 V
1772915672	23 Pkt	1 Pkt	3 Pkt	-53 dBm	3.59 V
1772913846	9 Pkt	0 Pkt	0 Pkt	-51 dBm	3.59 V
1772912020	17 Pkt	0 Pkt	0 Pkt	-49 dBm	3.59 V
1772910195	8 Pkt	0 Pkt	1 Pkt	-50 dBm	3.59 V
1772908369	12 Pkt	0 Pkt	1 Pkt	-50 dBm	3.59 V
1772906544	12 Pkt	0 Pkt	0 Pkt	-50 dBm	3.59 V
1772904718	9 Pkt	0 Pkt	0 Pkt	-50 dBm	3.59 V
1772902893	11 Pkt	0 Pkt	1 Pkt	-50 dBm	3.59 V
1772901067	8 Pkt	0 Pkt	0 Pkt	-51 dBm	3.59 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)