HS3HXZ-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS3HXZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1789963212	21 Pkt	0 Pkt	0 Pkt	-40 dBm	13.56 V
1789962287	18 Pkt	0 Pkt	0 Pkt	-40 dBm	13.58 V
1789961362	14 Pkt	0 Pkt	0 Pkt	-39 dBm	13.49 V
1789960438	21 Pkt	0 Pkt	0 Pkt	-39 dBm	13.56 V
1789959513	14 Pkt	0 Pkt	0 Pkt	-39 dBm	13.49 V
1789958589	30 Pkt	0 Pkt	0 Pkt	-39 dBm	13.39 V
1789957664	17 Pkt	0 Pkt	0 Pkt	-38 dBm	13.39 V
1789956739	21 Pkt	0 Pkt	0 Pkt	-40 dBm	13.39 V
1789955814	29 Pkt	0 Pkt	0 Pkt	-39 dBm	13.45 V
1789954889	29 Pkt	0 Pkt	0 Pkt	-39 dBm	13.54 V
1789953965	40 Pkt	0 Pkt	0 Pkt	-39 dBm	13.39 V
1789953039	30 Pkt	1 Pkt	0 Pkt	-39 dBm	13.54 V
1789952114	25 Pkt	0 Pkt	1 Pkt	-39 dBm	13.39 V
1789951189	43 Pkt	0 Pkt	4 Pkt	-39 dBm	13.41 V
1789950263	36 Pkt	0 Pkt	2 Pkt	-39 dBm	13.54 V
1789949339	34 Pkt	0 Pkt	0 Pkt	-39 dBm	13.41 V
1789948414	26 Pkt	0 Pkt	0 Pkt	-39 dBm	13.49 V
1789947489	27 Pkt	0 Pkt	1 Pkt	-39 dBm	13.37 V
1789946564	41 Pkt	0 Pkt	2 Pkt	-39 dBm	13.39 V
1789945638	24 Pkt	0 Pkt	0 Pkt	-39 dBm	13.54 V
1789944713	25 Pkt	0 Pkt	0 Pkt	-39 dBm	13.54 V
1789943788	20 Pkt	0 Pkt	0 Pkt	-39 dBm	13.49 V
1789942863	28 Pkt	0 Pkt	0 Pkt	-39 dBm	13.45 V
1789941938	43 Pkt	0 Pkt	0 Pkt	-39 dBm	13.47 V
1789941013	30 Pkt	0 Pkt	0 Pkt	-39 dBm	13.37 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)