DF4ND-36 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DF4ND-36. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1761491104	964.5 hPa	7.8 C deg	1015.8 hPa	0 C deg
1761487473	964.1 hPa	9.2 C deg	1015.1 hPa	0 C deg
1761483843	963.6 hPa	7.5 C deg	1014.9 hPa	0 C deg
1761481043	963.6 hPa	8 C deg	1014.8 hPa	0 C deg
1761480738	963.6 hPa	8 C deg	1014.8 hPa	0 C deg
1761480081	963.7 hPa	8.5 C deg	1014.8 hPa	0 C deg
1761478962	963.7 hPa	8 C deg	1014.9 hPa	0 C deg
1761477947	963.5 hPa	7.4 C deg	1014.9 hPa	0 C deg
1761476629	963.5 hPa	7.8 C deg	1014.8 hPa	0 C deg
1761474819	963.3 hPa	8.1 C deg	1014.5 hPa	0 C deg
1761469371	962.7 hPa	7.7 C deg	1013.9 hPa	0 C deg
1761463928	962.1 hPa	7 C deg	1013.5 hPa	0 C deg
1761462107	961.8 hPa	4 C deg	1013.7 hPa	0 C deg
1761460305	961.3 hPa	2.7 C deg	1013.4 hPa	0 C deg
1761460305	961.3 hPa	2.7 C deg	1013.4 hPa	0 C deg
1761458486	961.1 hPa	3 C deg	1013.2 hPa	0 C deg
1761456659	960.8 hPa	3.5 C deg	1012.7 hPa	0 C deg
1761454847	960.7 hPa	4.3 C deg	1012.5 hPa	0 C deg
1761453025	960.1 hPa	6 C deg	1011.5 hPa	0 C deg
1761449395	959.6 hPa	6.4 C deg	1010.9 hPa	0 C deg
1761447580	959.7 hPa	6.5 C deg	1011 hPa	0 C deg
1761445762	959.9 hPa	6.6 C deg	1011.2 hPa	0 C deg
1761443947	960 hPa	6.6 C deg	1011.3 hPa	0 C deg
1761442132	960.5 hPa	6.8 C deg	1011.8 hPa	0 C deg
1761440317	960.8 hPa	6.9 C deg	1012.1 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)