EA4CHS-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA4CHS-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1772925592	400 Pkts	0 Pkts	0 Pkts	0 C
1772925582	400 Pkts	0 Pkts	0 Pkts	0 C
1772925537	399 Pkts	0 Pkts	0 Pkts	0 C
1772925496	398 Pkts	0 Pkts	0 Pkts	0 C
1772925421	402 Pkts	0 Pkts	0 Pkts	0 C
1772925359	402 Pkts	0 Pkts	0 Pkts	0 C
1772925335	398 Pkts	0 Pkts	0 Pkts	0 C
1772925234	398 Pkts	0 Pkts	0 Pkts	0 C
1772925215	399 Pkts	0 Pkts	0 Pkts	0 C
1772925074	400 Pkts	0 Pkts	0 Pkts	0 C
1772698822	119 Pkts	113 Pkts	76 Pkts	32 C
1772695222	101 Pkts	95 Pkts	62 Pkts	32 C
1772691622	83 Pkts	77 Pkts	45 Pkts	32 C
1772688022	94 Pkts	88 Pkts	58 Pkts	32 C
1772684422	93 Pkts	87 Pkts	53 Pkts	32 C
1772680822	89 Pkts	83 Pkts	55 Pkts	32 C
1772677222	94 Pkts	89 Pkts	55 Pkts	32 C
1772673622	89 Pkts	83 Pkts	47 Pkts	32 C
1772670022	87 Pkts	81 Pkts	50 Pkts	32 C
1772666423	94 Pkts	88 Pkts	52 Pkts	32 C
1772662823	96 Pkts	90 Pkts	53 Pkts	32 C
1772659223	90 Pkts	84 Pkts	46 Pkts	32 C
1772655622	91 Pkts	86 Pkts	56 Pkts	32 C
1772652022	97 Pkts	91 Pkts	59 Pkts	31 C
1772648422	88 Pkts	82 Pkts	51 Pkts	32 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)