DG2AAO-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DG2AAO-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1781587271	1004.6 hPa	35.1 C deg	17.8 %	1015.3 hPa	0 C deg
1781587270	1004.6 hPa	35.1 C deg	17.8 %	1015.3 hPa	0 C deg
1781587211	1004.6 hPa	35.1 C deg	17.8 %	1015.3 hPa	0 C deg
1781587210	1004.6 hPa	35.1 C deg	17.8 %	1015.3 hPa	0 C deg
1781587128	1004.6 hPa	35.1 C deg	17.8 %	1015.3 hPa	0 C deg
1781586970	1004.5 hPa	35 C deg	17.9 %	1015.2 hPa	0 C deg
1781586937	1004.5 hPa	35 C deg	17.9 %	1015.2 hPa	0 C deg
1781586869	1004.5 hPa	35 C deg	17.9 %	1015.2 hPa	0 C deg
1781586745	1004.5 hPa	35 C deg	18 %	1015.2 hPa	0 C deg
1781586744	1004.5 hPa	35 C deg	18 %	1015.2 hPa	0 C deg
1781586700	1004.5 hPa	35 C deg	18 %	1015.2 hPa	0 C deg
1781586630	1004.4 hPa	35 C deg	18 %	1015.2 hPa	0 C deg
1781586583	1004.5 hPa	35 C deg	18 %	1015.2 hPa	0 C deg
1781586582	1004.5 hPa	35 C deg	18 %	1015.2 hPa	0 C deg
1781586481	1004.4 hPa	35 C deg	18 %	1015.1 hPa	0 C deg
1781586480	1004.4 hPa	35 C deg	18 %	1015.1 hPa	0 C deg
1781586236	1004.5 hPa	35 C deg	18.1 %	1015.2 hPa	0 C deg
1781586232	1004.5 hPa	35 C deg	18.1 %	1015.2 hPa	0 C deg
1781586142	1004.5 hPa	35 C deg	18.1 %	1015.2 hPa	0 C deg
1781586139	1004.5 hPa	35 C deg	18.1 %	1015.2 hPa	0 C deg
1781586052	1004.5 hPa	35 C deg	18.1 %	1015.2 hPa	0 C deg
1781586051	1004.5 hPa	35 C deg	18.1 %	1015.2 hPa	0 C deg
1781585936	1004.4 hPa	35 C deg	18.1 %	1015.1 hPa	0 C deg
1781585934	1004.4 hPa	35 C deg	18.1 %	1015.1 hPa	0 C deg
1781585857	1004.5 hPa	35 C deg	18.1 %	1015.2 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)