IU0TXS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IU0TXS. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPkt*	TxPkt*	Batt*
1761880533	40 Pkt/10m	39 Pkt/10m	3.98 Volt
1761879330	37 Pkt/10m	36 Pkt/10m	3.98 Volt
1761878127	42 Pkt/10m	42 Pkt/10m	3.98 Volt
1761876923	39 Pkt/10m	39 Pkt/10m	4 Volt
1761875720	40 Pkt/10m	39 Pkt/10m	3.98 Volt
1761874517	43 Pkt/10m	43 Pkt/10m	3.98 Volt
1761873313	42 Pkt/10m	41 Pkt/10m	3.98 Volt
1761872110	41 Pkt/10m	37 Pkt/10m	3.96 Volt
1761870907	42 Pkt/10m	40 Pkt/10m	4 Volt
1761868500	44 Pkt/10m	40 Pkt/10m	3.98 Volt
1761867297	36 Pkt/10m	34 Pkt/10m	3.98 Volt
1761866093	36 Pkt/10m	35 Pkt/10m	4 Volt
1761864890	42 Pkt/10m	40 Pkt/10m	3.98 Volt
1761863686	39 Pkt/10m	37 Pkt/10m	3.98 Volt
1761862485	22 Pkt/10m	17 Pkt/10m	4 Volt
1761861280	23 Pkt/10m	16 Pkt/10m	3.98 Volt
1761860076	15 Pkt/10m	12 Pkt/10m	3.96 Volt
1761858873	20 Pkt/10m	16 Pkt/10m	3.98 Volt
1761857670	17 Pkt/10m	16 Pkt/10m	3.98 Volt
1761856469	22 Pkt/10m	20 Pkt/10m	3.98 Volt
1761855263	23 Pkt/10m	20 Pkt/10m	3.98 Volt
1761854060	22 Pkt/10m	20 Pkt/10m	3.98 Volt
1761852856	18 Pkt/10m	14 Pkt/10m	3.98 Volt
1761851653	17 Pkt/10m	12 Pkt/10m	3.98 Volt
1761850450	18 Pkt/10m	15 Pkt/10m	3.98 Volt

*Used Equation Coefficients:

RxPkt: 0, 1, 0

TxPkt: 0, 1, 0

Batt: 0, 0.0196, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)