WC4PEM-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Dg1h*	Rx1h*	Eff1h*
1784671543	24.5 C	14.25 Volt	260 Pkt	86 Pkt	71 Pcnt
1784671543	24.5 C	14.25 Volt	260 Pkt	86 Pkt	71 Pcnt
1784671243	25 C	14.25 Volt	260 Pkt	88 Pkt	73 Pcnt
1784670943	25 C	14.25 Volt	260 Pkt	88 Pkt	72 Pcnt
1784670943	25 C	14.25 Volt	260 Pkt	88 Pkt	72 Pcnt
1784670643	25.5 C	14.25 Volt	260 Pkt	88 Pkt	72 Pcnt
1784670343	25 C	14.25 Volt	260 Pkt	88 Pkt	72 Pcnt
1784670343	25 C	14.25 Volt	260 Pkt	88 Pkt	72 Pcnt
1784670043	24.5 C	14.18 Volt	260 Pkt	88 Pkt	72 Pcnt
1784669743	25.5 C	14.25 Volt	260 Pkt	88 Pkt	72 Pcnt
1784669743	25.5 C	14.25 Volt	260 Pkt	88 Pkt	72 Pcnt
1784669463	25 C	14.25 Volt	250 Pkt	88 Pkt	73 Pcnt
1784669143	25 C	14.25 Volt	250 Pkt	88 Pkt	73 Pcnt
1784669143	25 C	14.25 Volt	250 Pkt	88 Pkt	73 Pcnt
1784668843	25.5 C	14.25 Volt	250 Pkt	86 Pkt	72 Pcnt
1784668543	25 C	14.25 Volt	250 Pkt	86 Pkt	72 Pcnt
1784668543	25 C	14.25 Volt	250 Pkt	86 Pkt	72 Pcnt
1784668243	25 C	14.25 Volt	250 Pkt	86 Pkt	72 Pcnt
1784667943	25 C	14.25 Volt	250 Pkt	85 Pkt	71 Pcnt
1784667943	25 C	14.25 Volt	250 Pkt	85 Pkt	71 Pcnt
1784667643	24.5 C	14.25 Volt	260 Pkt	85 Pkt	71 Pcnt
1784667343	25 C	14.25 Volt	260 Pkt	84 Pkt	71 Pcnt
1784667343	25 C	14.25 Volt	260 Pkt	84 Pkt	71 Pcnt
1784667043	24.5 C	14.25 Volt	270 Pkt	87 Pkt	72 Pcnt
1784666743	25 C	14.25 Volt	280 Pkt	86 Pkt	71 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Dg1h: 0, 10, 0

Rx1h: 0, 1, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)