SQ8XY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ8XY. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1761771834	83 Count	19 Count	12 Count	4.3 VDC	2.92 VDC
1761764945	42 Count	5 Count	4 Count	4.28 VDC	0.14 VDC
1761764643	40 Count	4 Count	3 Count	4.26 VDC	0.14 VDC
1761764531	37 Count	2 Count	1 Count	4.31 VDC	0.14 VDC
1761764384	35 Count	0 Count	0 Count	4.3 VDC	0.14 VDC
1761763754	30 Count	0 Count	0 Count	4.29 VDC	0.14 VDC
1761763451	29 Count	0 Count	0 Count	4.25 VDC	0.14 VDC
1761763149	28 Count	0 Count	0 Count	4.28 VDC	0.14 VDC
1761763117	27 Count	0 Count	0 Count	4.34 VDC	0.14 VDC
1761762896	26 Count	0 Count	0 Count	4.33 VDC	0.14 VDC
1761762747	25 Count	0 Count	0 Count	4.29 VDC	0.14 VDC
1761762731	24 Count	0 Count	0 Count	4.32 VDC	0.14 VDC
1761762604	23 Count	0 Count	0 Count	4.26 VDC	0.14 VDC
1761762290	22 Count	0 Count	0 Count	4.29 VDC	0.14 VDC
1761761897	20 Count	0 Count	0 Count	4.26 VDC	0.14 VDC
1761761778	19 Count	0 Count	0 Count	4.33 VDC	0.14 VDC
1761761475	18 Count	0 Count	0 Count	4.34 VDC	0.14 VDC
1761761173	17 Count	0 Count	0 Count	4.3 VDC	0.14 VDC
1761760870	16 Count	0 Count	0 Count	4.34 VDC	0.14 VDC
1761760567	15 Count	0 Count	0 Count	4.25 VDC	0.14 VDC
1761760563	14 Count	0 Count	0 Count	4.31 VDC	0.14 VDC
1761760553	13 Count	0 Count	0 Count	4.3 VDC	0.14 VDC
1761760546	12 Count	0 Count	0 Count	4.34 VDC	0.14 VDC
1761760198	10 Count	0 Count	0 Count	4.32 VDC	0.14 VDC
1761760187	9 Count	0 Count	0 Count	4.3 VDC	0.14 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)