This is the latest recevied telemetry packets stored in our database for station/object SP8HDC. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
TX*
RX*
Digi*
V_Bat*
V_Ext*
1761810793
0 Count
7 Count
0 Count
0 VDC
0 VDC
1761764561
28 Count
51 Count
9 Count
0 VDC
0 VDC
1761764546
27 Count
51 Count
9 Count
0 VDC
0 VDC
1761764537
26 Count
50 Count
9 Count
0 VDC
0 VDC
1761764362
22 Count
43 Count
7 Count
0 VDC
0 VDC
1761764039
17 Count
34 Count
5 Count
0 VDC
0 VDC
1761764036
16 Count
34 Count
5 Count
0 VDC
0 VDC
1761764006
15 Count
34 Count
5 Count
0 VDC
0 VDC
1761763997
14 Count
34 Count
5 Count
0 VDC
0 VDC
1761763967
13 Count
32 Count
5 Count
0 VDC
0 VDC
1761763819
11 Count
27 Count
4 Count
0 VDC
0 VDC
1761763813
10 Count
27 Count
4 Count
0 VDC
0 VDC
1761763681
8 Count
26 Count
4 Count
0 VDC
0 VDC
1761763673
7 Count
26 Count
4 Count
0 VDC
0 VDC
1761763565
5 Count
22 Count
4 Count
0 VDC
0 VDC
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)