SR6NWS-0 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR6NWS-0. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784664640	12.23 Volt	530 Pkt	40 Pkt	45 Pcnt
1784662837	12.23 Volt	570 Pkt	60 Pkt	48 Pcnt
1784635841	12.23 Volt	540 Pkt	40 Pkt	45 Pcnt
1784509841	12.23 Volt	590 Pkt	20 Pkt	52 Pcnt
1784499045	12.15 Volt	670 Pkt	50 Pkt	57 Pcnt
1784481041	12.23 Volt	590 Pkt	70 Pkt	48 Pcnt
1784477441	12.23 Volt	670 Pkt	60 Pkt	50 Pcnt
1784475641	12.23 Volt	680 Pkt	50 Pkt	52 Pcnt
1784470241	12.23 Volt	720 Pkt	80 Pkt	50 Pcnt
1784455841	12.23 Volt	620 Pkt	60 Pkt	50 Pcnt
1784454041	12.23 Volt	660 Pkt	70 Pkt	54 Pcnt
1784412646	12.23 Volt	550 Pkt	40 Pkt	52 Pcnt
1784394643	12.23 Volt	540 Pkt	30 Pkt	48 Pcnt
1784385643	12.23 Volt	620 Pkt	60 Pkt	49 Pcnt
1784364043	12.23 Volt	540 Pkt	80 Pkt	45 Pcnt
1784322644	12.15 Volt	780 Pkt	30 Pkt	53 Pcnt
1784317244	12.23 Volt	820 Pkt	40 Pkt	53 Pcnt
1784290245	12.23 Volt	440 Pkt	90 Pkt	38 Pcnt
1784256046	12.23 Volt	610 Pkt	30 Pkt	53 Pcnt
1784239846	12.23 Volt	620 Pkt	40 Pkt	53 Pcnt
1784236246	12.23 Volt	540 Pkt	50 Pkt	51 Pcnt
1784230846	12.23 Volt	620 Pkt	80 Pkt	49 Pcnt
1784205647	12.15 Volt	590 Pkt	140 Pkt	47 Pcnt
1784196647	12.23 Volt	650 Pkt	70 Pkt	50 Pcnt
1784158851	12.23 Volt	700 Pkt	30 Pkt	52 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

T_ext: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)