EL-F1ISM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-F1ISM. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Value1*	Value2*	Value3*	Value4*
1762020658	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1762020058	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	3 TXcount/10m
1762019458	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	9 TXcount/10m
1762018858	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1762018258	0 RX Erlang	0.01 TX Erlang	1 RXcount/10m	3 TXcount/10m
1762017058	0 RX Erlang	0.96 TX Erlang	0 RXcount/10m	8 TXcount/10m
1762016458	0 RX Erlang	0.92 TX Erlang	0 RXcount/10m	12 TXcount/10m
1762015858	0 RX Erlang	0.97 TX Erlang	0 RXcount/10m	7 TXcount/10m
1762015258	0 RX Erlang	0.78 TX Erlang	0 RXcount/10m	10 TXcount/10m
1762014658	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	6 TXcount/10m
1762014058	0 RX Erlang	0.8 TX Erlang	0 RXcount/10m	7 TXcount/10m
1762013458	0 RX Erlang	0.23 TX Erlang	0 RXcount/10m	5 TXcount/10m
1762012858	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	2 TXcount/10m
1762012258	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1762011658	0 RX Erlang	0.08 TX Erlang	0 RXcount/10m	7 TXcount/10m
1762011058	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	4 TXcount/10m
1762010458	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1762009858	0 RX Erlang	0.25 TX Erlang	0 RXcount/10m	13 TXcount/10m
1762009258	0 RX Erlang	0.87 TX Erlang	0 RXcount/10m	11 TXcount/10m
1762008658	0 RX Erlang	0.95 TX Erlang	0 RXcount/10m	9 TXcount/10m
1762008058	0 RX Erlang	0.69 TX Erlang	0 RXcount/10m	27 TXcount/10m
1762007458	0 RX Erlang	0.53 TX Erlang	0 RXcount/10m	14 TXcount/10m
1762006858	0 RX Erlang	0.71 TX Erlang	0 RXcount/10m	20 TXcount/10m
1762006258	0 RX Erlang	0.34 TX Erlang	1 RXcount/10m	17 TXcount/10m
1762005658	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	3 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)