W2LS-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W2LS-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	InetIn*
1772725711	10 Pkts	8 Pkts	3 Pkts	0 Pkts
1772723883	10 Pkts	7 Pkts	3 Pkts	2 Pkts
1772722083	10 Pkts	10 Pkts	4 Pkts	1 Pkts
1772720283	7 Pkts	5 Pkts	2 Pkts	2 Pkts
1772718483	6 Pkts	5 Pkts	5 Pkts	4 Pkts
1772716683	12 Pkts	11 Pkts	9 Pkts	2 Pkts
1772714883	9 Pkts	7 Pkts	4 Pkts	4 Pkts
1772713083	9 Pkts	8 Pkts	5 Pkts	2 Pkts
1772711283	3 Pkts	2 Pkts	1 Pkts	3 Pkts
1772709483	5 Pkts	3 Pkts	3 Pkts	0 Pkts
1772707683	2 Pkts	1 Pkts	1 Pkts	1 Pkts
1772705883	4 Pkts	4 Pkts	4 Pkts	2 Pkts
1772704083	11 Pkts	9 Pkts	7 Pkts	4 Pkts
1772702283	9 Pkts	8 Pkts	6 Pkts	0 Pkts
1772700483	15 Pkts	13 Pkts	9 Pkts	1 Pkts
1772698683	10 Pkts	7 Pkts	5 Pkts	2 Pkts
1772696883	7 Pkts	4 Pkts	3 Pkts	5 Pkts
1772695083	16 Pkts	13 Pkts	6 Pkts	4 Pkts
1772693283	15 Pkts	13 Pkts	7 Pkts	6 Pkts
1772691483	16 Pkts	15 Pkts	6 Pkts	4 Pkts
1772689683	16 Pkts	14 Pkts	8 Pkts	3 Pkts
1772687883	14 Pkts	11 Pkts	3 Pkts	2 Pkts
1772686083	25 Pkts	23 Pkts	7 Pkts	5 Pkts
1772684283	23 Pkts	22 Pkts	7 Pkts	1 Pkts
1772682483	11 Pkts	9 Pkts	5 Pkts	1 Pkts

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

InetIn: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)