SQ3KT-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ3KT-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*
1777053747	15 Count	90 Count	8 Count	4.27 VDC
1777052847	13 Count	73 Count	7 Count	4.19 VDC
1777051946	11 Count	63 Count	6 Count	4.22 VDC
1777051045	9 Count	52 Count	5 Count	4.2 VDC
1777050145	7 Count	42 Count	4 Count	4.18 VDC
1777049244	5 Count	30 Count	3 Count	4.23 VDC
1777048343	3 Count	20 Count	2 Count	4.22 VDC
1777047442	1 Count	10 Count	1 Count	4.23 VDC
1777046542	202 Count	1004 Count	76 Count	4.26 VDC
1777045641	200 Count	993 Count	75 Count	4.23 VDC
1777044745	198 Count	973 Count	74 Count	4.26 VDC
1777043847	196 Count	945 Count	73 Count	4.27 VDC
1777042955	190 Count	935 Count	72 Count	4.18 VDC
1777042054	188 Count	925 Count	71 Count	4.18 VDC
1777041154	186 Count	901 Count	70 Count	4.17 VDC
1777040253	184 Count	889 Count	69 Count	4.2 VDC
1777038451	180 Count	844 Count	67 Count	4.18 VDC
1777037551	176 Count	813 Count	64 Count	4.2 VDC
1777036650	174 Count	802 Count	63 Count	4.29 VDC
1777035753	172 Count	789 Count	62 Count	4.2 VDC
1777034848	170 Count	772 Count	61 Count	4.27 VDC
1777033948	168 Count	762 Count	60 Count	4.21 VDC
1777033047	166 Count	753 Count	59 Count	4.21 VDC
1777032146	164 Count	743 Count	58 Count	4.23 VDC
1777031246	162 Count	730 Count	57 Count	4.19 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)