IK4GRI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IK4GRI-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPkt*	TxPkt*	Batt*
1762359360	38 Pkt/10m	37 Pkt/10m	3.9 Volt
1762358156	34 Pkt/10m	32 Pkt/10m	3.9 Volt
1762356952	22 Pkt/10m	22 Pkt/10m	3.9 Volt
1762355748	48 Pkt/10m	47 Pkt/10m	3.92 Volt
1762354544	37 Pkt/10m	34 Pkt/10m	3.9 Volt
1762353339	27 Pkt/10m	26 Pkt/10m	3.9 Volt
1762352135	35 Pkt/10m	33 Pkt/10m	3.88 Volt
1762350931	20 Pkt/10m	20 Pkt/10m	3.9 Volt
1762349727	7 Pkt/10m	6 Pkt/10m	3.9 Volt
1762348523	7 Pkt/10m	7 Pkt/10m	3.9 Volt
1762347319	8 Pkt/10m	8 Pkt/10m	3.9 Volt
1762346115	12 Pkt/10m	11 Pkt/10m	3.9 Volt
1762344911	18 Pkt/10m	18 Pkt/10m	3.9 Volt
1762343707	5 Pkt/10m	5 Pkt/10m	3.88 Volt
1762340105	29 Pkt/10m	27 Pkt/10m	3.88 Volt
1762338890	24 Pkt/10m	24 Pkt/10m	3.9 Volt
1762337686	15 Pkt/10m	15 Pkt/10m	3.88 Volt
1762336482	11 Pkt/10m	11 Pkt/10m	3.88 Volt
1762335278	13 Pkt/10m	13 Pkt/10m	3.9 Volt
1762334074	18 Pkt/10m	18 Pkt/10m	3.9 Volt
1762332870	22 Pkt/10m	22 Pkt/10m	3.88 Volt
1762331666	39 Pkt/10m	38 Pkt/10m	3.92 Volt
1762330462	27 Pkt/10m	24 Pkt/10m	3.9 Volt
1762329258	19 Pkt/10m	19 Pkt/10m	3.88 Volt
1762328054	15 Pkt/10m	15 Pkt/10m	3.88 Volt

*Used Equation Coefficients:

RxPkt: 0, 1, 0

TxPkt: 0, 1, 0

Batt: 0, 0.0196, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)