DL4CH-99 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL4CH-99. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1763234921	1010.3 hPa	19.2 C deg	1014.9 hPa	0 C deg
1763233086	1010.4 hPa	19.3 C deg	1015 hPa	0 C deg
1763231292	1010.6 hPa	19.3 C deg	1015.2 hPa	0 C deg
1763227677	1011.2 hPa	18.7 C deg	1015.8 hPa	0 C deg
1763225844	1011.4 hPa	18.8 C deg	1016 hPa	0 C deg
1763222256	1011.6 hPa	18.8 C deg	1016.2 hPa	0 C deg
1763220464	1011.8 hPa	19 C deg	1016.4 hPa	0 C deg
1763211499	1013 hPa	17.9 C deg	1017.6 hPa	0 C deg
1763067278	1007.9 hPa	19.7 C deg	1012.5 hPa	0 C deg
1763061809	1007.3 hPa	19.5 C deg	1011.9 hPa	0 C deg
1762977613	1006.1 hPa	19.4 C deg	1010.6 hPa	0 C deg
1762888757	1011.3 hPa	19.9 C deg	1015.9 hPa	0 C deg
1762886924	1011.7 hPa	19.8 C deg	1016.3 hPa	0 C deg
1762881817	1011.3 hPa	19 C deg	1016 hPa	0 C deg
1762802780	1010.1 hPa	20 C deg	1014.7 hPa	0 C deg
1762712508	1013.1 hPa	19.7 C deg	1017.7 hPa	0 C deg
1762710754	1013.2 hPa	19.7 C deg	1017.8 hPa	0 C deg
1762707088	1013 hPa	19.7 C deg	1017.6 hPa	0 C deg
1762703459	1012.8 hPa	19.7 C deg	1017.4 hPa	0 C deg
1762698088	1012.7 hPa	24.7 C deg	1017.3 hPa	0 C deg
1762696254	1012.8 hPa	24.8 C deg	1017.3 hPa	0 C deg
1762690786	1012.8 hPa	24.6 C deg	1017.4 hPa	0 C deg
1762683107	1013.4 hPa	25 C deg	1017.9 hPa	0 C deg
1762635445	1012.5 hPa	25.4 C deg	1017 hPa	0 C deg
1762634874	1012.5 hPa	25.5 C deg	1017 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)