COUGAR Telemetry

This is the latest recevied telemetry packets stored in our database for station/object COUGAR. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1762429498	12.48 Volt	330 Pkt	10 Pkt	95 Pcnt
1762427698	12.48 Volt	330 Pkt	10 Pkt	94 Pcnt
1762425898	12.48 Volt	330 Pkt	10 Pkt	94 Pcnt
1762424126	12.48 Volt	310 Pkt	10 Pkt	97 Pcnt
1762422298	12.48 Volt	330 Pkt	10 Pkt	97 Pcnt
1762420498	12.48 Volt	350 Pkt	10 Pkt	97 Pcnt
1762418698	12.48 Volt	360 Pkt	10 Pkt	96 Pcnt
1762416898	12.48 Volt	350 Pkt	10 Pkt	95 Pcnt
1762415098	12.48 Volt	330 Pkt	10 Pkt	94 Pcnt
1762413298	12.48 Volt	310 Pkt	10 Pkt	93 Pcnt
1762411525	12.48 Volt	320 Pkt	10 Pkt	95 Pcnt
1762409698	12.48 Volt	320 Pkt	10 Pkt	95 Pcnt
1762407898	12.56 Volt	330 Pkt	10 Pkt	94 Pcnt
1762406098	12.48 Volt	370 Pkt	20 Pkt	95 Pcnt
1762404298	12.56 Volt	390 Pkt	20 Pkt	96 Pcnt
1762402513	12.48 Volt	310 Pkt	10 Pkt	92 Pcnt
1762400698	12.56 Volt	290 Pkt	10 Pkt	89 Pcnt
1762397098	12.56 Volt	330 Pkt	10 Pkt	91 Pcnt
1762395299	12.56 Volt	340 Pkt	20 Pkt	95 Pcnt
1762393499	12.56 Volt	340 Pkt	20 Pkt	96 Pcnt
1762391699	12.56 Volt	380 Pkt	40 Pkt	92 Pcnt
1762389899	12.56 Volt	380 Pkt	60 Pkt	88 Pcnt
1762388099	12.56 Volt	290 Pkt	40 Pkt	85 Pcnt
1762384499	12.56 Volt	280 Pkt	50 Pkt	83 Pcnt
1762382699	12.56 Volt	270 Pkt	40 Pkt	82 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)