SQ1EUJ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ1EUJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1781557804	58 Deg.C	2 %
1781557202	57 Deg.C	2 %
1781556601	57 Deg.C	2 %
1781556005	57 Deg.C	2 %
1781555401	56 Deg.C	2 %
1781554805	57 Deg.C	2 %
1781554201	57 Deg.C	2 %
1781553605	57 Deg.C	2 %
1781553002	57 Deg.C	2 %
1781552401	58 Deg.C	2 %
1781551838	56 Deg.C	2 %
1781551201	57 Deg.C	2 %
1781550605	58 Deg.C	2 %
1781550001	58 Deg.C	2 %
1781549405	58 Deg.C	2 %
1781548801	57 Deg.C	2 %
1781548201	57 Deg.C	2 %
1781547605	57 Deg.C	2 %
1781547001	57 Deg.C	2 %
1781546405	58 Deg.C	2 %
1781545801	57 Deg.C	2 %
1781545205	58 Deg.C	2 %
1781544601	57 Deg.C	2 %
1781544002	58 Deg.C	2 %
1781543404	58 Deg.C	2 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)