DL1THI-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL1THI-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1788083843	974.5 hPa	19.2 C deg	1027.2 hPa	0 C deg
1788082028	974.5 hPa	19 C deg	1027.2 hPa	0 C deg
1788080216	974.2 hPa	19 C deg	1026.9 hPa	0 C deg
1788078398	974 hPa	18.9 C deg	1026.7 hPa	0 C deg
1788076582	973.8 hPa	18.8 C deg	1026.5 hPa	0 C deg
1788074767	973.7 hPa	19 C deg	1026.4 hPa	0 C deg
1788072952	973.3 hPa	19.2 C deg	1025.9 hPa	0 C deg
1788071137	973 hPa	19.2 C deg	1025.6 hPa	0 C deg
1788069322	972.7 hPa	19.2 C deg	1025.3 hPa	0 C deg
1788067507	972.6 hPa	19.2 C deg	1025.2 hPa	0 C deg
1788065692	972.5 hPa	19.1 C deg	1025.1 hPa	0 C deg
1788063877	972.4 hPa	19.3 C deg	1025 hPa	0 C deg
1788062062	972.3 hPa	19.5 C deg	1024.8 hPa	0 C deg
1788060247	972.3 hPa	19.6 C deg	1024.8 hPa	0 C deg
1788058431	972.2 hPa	19.6 C deg	1024.6 hPa	0 C deg
1788056616	972.2 hPa	19.6 C deg	1024.6 hPa	0 C deg
1788054812	972.3 hPa	19.8 C deg	1024.7 hPa	0 C deg
1788052986	972.3 hPa	19.8 C deg	1024.7 hPa	0 C deg
1788051171	972.2 hPa	19.9 C deg	1024.6 hPa	0 C deg
1788049356	972.4 hPa	20 C deg	1024.8 hPa	0 C deg
1788047541	972.6 hPa	20 C deg	1025 hPa	0 C deg
1788045726	972.5 hPa	19.9 C deg	1025 hPa	0 C deg
1788043911	972.7 hPa	20.1 C deg	1025.1 hPa	0 C deg
1788042095	972.7 hPa	20.2 C deg	1025.1 hPa	0 C deg
1788040280	972.9 hPa	20.2 C deg	1025.3 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)