SP2ROC-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP2ROC-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RPM*	VBAT*	TEMP*	TRIP*	MTH*
1777140504	1394 rpm	15.01 V	66 degC	4 km	25 h
1777140474	911 rpm	14.94 V	66 degC	4 km	25 h
1777140444	791 rpm	14.89 V	66 degC	4 km	25 h
1777140414	793 rpm	14.94 V	66 degC	4 km	25 h
1777140383	792 rpm	14.88 V	66 degC	4 km	25 h
1777140353	823 rpm	14.88 V	65 degC	4 km	25 h
1777140323	1315 rpm	14.94 V	65 degC	4 km	25 h
1777140293	1371 rpm	14.86 V	65 degC	3.9 km	25 h
1777140263	1390 rpm	14.89 V	65 degC	3.8 km	25 h
1777140233	822 rpm	13.9 V	65 degC	3.8 km	25 h
1777140174	1603 rpm	13.88 V	65 degC	3.5 km	25 h
1777140143	1651 rpm	13.9 V	65 degC	3.4 km	25 h
1777140114	1669 rpm	13.98 V	65 degC	3.2 km	25 h
1777140083	1657 rpm	13.9 V	65 degC	3.1 km	25 h
1777140053	1667 rpm	13.92 V	65 degC	2.9 km	25 h
1777139994	1707 rpm	13.92 V	65 degC	2.6 km	25 h
1777139963	1743 rpm	13.81 V	65 degC	2.4 km	25 h
1777139933	1551 rpm	13.92 V	65 degC	2.2 km	25 h
1777139902	1535 rpm	13.84 V	65 degC	2 km	25 h
1777139873	1561 rpm	13.81 V	65 degC	1.9 km	25 h
1777139813	1336 rpm	13.87 V	65 degC	1.6 km	25 h
1777139723	1689 rpm	13.73 V	65 degC	1.1 km	25 h
1777139693	1717 rpm	13.7 V	65 degC	1 km	25 h
1777139662	1693 rpm	13.8 V	65 degC	0.8 km	25 h
1777139633	1535 rpm	13.65 V	65 degC	0.6 km	25 h

*Used Equation Coefficients:

RPM: 0, 1, 0

VBAT: 0, 0.01, 0

TEMP: 0, 1, -100

TRIP: 0, 0.1, 0

MTH: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)