VK5RTG-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK5RTG-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1hr*	Dig1h*	Eff1h*
1777659449	14.02 Volt	18 Pkt	1 Pkt	97 Pcnt
1777655846	14.02 Volt	18 Pkt	1 Pkt	99 Pcnt
1777652243	14.02 Volt	18 Pkt	1 Pkt	93 Pcnt
1777648639	14.02 Volt	17 Pkt	1 Pkt	91 Pcnt
1777645036	14.02 Volt	18 Pkt	1 Pkt	95 Pcnt
1777641432	14.02 Volt	19 Pkt	1 Pkt	93 Pcnt
1777637829	14.02 Volt	17 Pkt	1 Pkt	97 Pcnt
1777634226	14.02 Volt	23 Pkt	2 Pkt	95 Pcnt
1777630622	14.02 Volt	22 Pkt	0 Pkt	98 Pcnt
1777627019	14.02 Volt	19 Pkt	0 Pkt	95 Pcnt
1777623415	14.02 Volt	18 Pkt	1 Pkt	95 Pcnt
1777619812	14.02 Volt	32 Pkt	1 Pkt	94 Pcnt
1777616208	14.02 Volt	28 Pkt	2 Pkt	95 Pcnt
1777612605	14.02 Volt	25 Pkt	1 Pkt	93 Pcnt
1777609002	14.02 Volt	33 Pkt	1 Pkt	94 Pcnt
1777605398	14.02 Volt	31 Pkt	1 Pkt	92 Pcnt
1777601795	14.02 Volt	32 Pkt	1 Pkt	92 Pcnt
1777598191	14.02 Volt	22 Pkt	1 Pkt	93 Pcnt
1777594588	14.02 Volt	23 Pkt	1 Pkt	94 Pcnt
1777590985	14.02 Volt	27 Pkt	1 Pkt	93 Pcnt
1777587381	14.02 Volt	27 Pkt	2 Pkt	94 Pcnt
1777583778	14.02 Volt	24 Pkt	2 Pkt	96 Pcnt
1777580174	14.02 Volt	29 Pkt	1 Pkt	93 Pcnt
1777576571	14.02 Volt	23 Pkt	1 Pkt	97 Pcnt
1777572967	14.02 Volt	22 Pkt	1 Pkt	94 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.073, 0

Rx1hr: 0, 1, 0

Dig1h: 0, 1, 0

Eff1h: 0, 1, 0

Temp: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)