DM3JK-99 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DM3JK-99. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1765581871	993.3 hPa	6.8 C deg	79.8 %	1034 hPa	0 C deg
1765569282	992.7 hPa	5.7 C deg	80 %	1033.5 hPa	0 C deg
1765502680	990.7 hPa	2.8 C deg	82.3 %	1031.9 hPa	0 C deg
1765502675	990.7 hPa	2.8 C deg	82.3 %	1031.9 hPa	0 C deg
1765407279	991 hPa	9.4 C deg	77.4 %	1031.2 hPa	0 C deg
1765407273	991 hPa	9.4 C deg	77.4 %	1031.2 hPa	0 C deg
1765310069	982.6 hPa	10.1 C deg	76.9 %	1022.3 hPa	0 C deg
1765310064	982.6 hPa	10.1 C deg	76.9 %	1022.3 hPa	0 C deg
1765128273	978.3 hPa	7.6 C deg	72.4 %	1018.3 hPa	0 C deg
1765128259	978.3 hPa	7.6 C deg	72.4 %	1018.3 hPa	0 C deg
1765122884	978.4 hPa	8.3 C deg	72.1 %	1018.3 hPa	0 C deg
1765095899	978.5 hPa	8 C deg	71.8 %	1018.4 hPa	0 C deg
1765095874	978.5 hPa	8 C deg	71.8 %	1018.4 hPa	0 C deg
1765083265	977.1 hPa	7.1 C deg	72.5 %	1017.1 hPa	0 C deg
1765083258	977.1 hPa	7.1 C deg	72.5 %	1017.1 hPa	0 C deg
1765000462	977.8 hPa	0.6 C deg	71.6 %	1018.7 hPa	0 C deg
1764996874	978.1 hPa	0.9 C deg	71.3 %	1019.1 hPa	0 C deg
1764996863	978.1 hPa	0.9 C deg	71.3 %	1019.1 hPa	0 C deg
1764991464	978.8 hPa	0.5 C deg	71.4 %	1019.8 hPa	0 C deg
1764991464	978.8 hPa	0.5 C deg	71.4 %	1019.8 hPa	0 C deg
1764989662	979 hPa	0.5 C deg	71.4 %	1020.1 hPa	0 C deg
1764989662	979 hPa	0.5 C deg	71.4 %	1020.1 hPa	0 C deg
1764980675	980.4 hPa	1.7 C deg	71.1 %	1021.3 hPa	0 C deg
1764980675	980.4 hPa	1.7 C deg	71.1 %	1021.3 hPa	0 C deg
1764975271	980.8 hPa	2.2 C deg	71.3 %	1021.7 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)