TA9WDX-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA9WDX-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1765550035	10 Pkt	3 Pkt	1 Pkt	-81 dBm	0.14 V
1765549283	0 Pkt	0 Pkt	1 Pkt	-82 dBm	0.14 V
1765548809	17 Pkt	4 Pkt	1 Pkt	-84 dBm	0.14 V
1765548346	10 Pkt	4 Pkt	3 Pkt	-83 dBm	0.14 V
1765546310	27 Pkt	4 Pkt	3 Pkt	-81 dBm	0.14 V
1765545181	0 Pkt	0 Pkt	0 Pkt	-85 dBm	0.14 V
1765543665	28 Pkt	1 Pkt	2 Pkt	-82 dBm	0.14 V
1765542913	5 Pkt	2 Pkt	0 Pkt	-83 dBm	0.14 V
1765542769	42 Pkt	2 Pkt	0 Pkt	-82 dBm	0.12 V
1765542769	36 Pkt	2 Pkt	2 Pkt	-82 dBm	0.14 V
1765541649	41 Pkt	4 Pkt	0 Pkt	-84 dBm	0.12 V
1765540573	35 Pkt	2 Pkt	3 Pkt	-82 dBm	0.14 V
1765538949	34 Pkt	2 Pkt	2 Pkt	-83 dBm	0.14 V
1765538607	18 Pkt	3 Pkt	1 Pkt	-82 dBm	0.14 V
1765537488	2 Pkt	0 Pkt	0 Pkt	-81 dBm	0.14 V
1765535382	18 Pkt	3 Pkt	0 Pkt	-83 dBm	0.12 V
1765534692	10 Pkt	3 Pkt	0 Pkt	-83 dBm	0.14 V
1765533996	0 Pkt	0 Pkt	0 Pkt	-83 dBm	0.14 V
1765533258	19 Pkt	2 Pkt	0 Pkt	-84 dBm	0.14 V
1765532497	13 Pkt	2 Pkt	0 Pkt	-84 dBm	0.14 V
1765531776	13 Pkt	2 Pkt	0 Pkt	-81 dBm	0.14 V
1765531032	0 Pkt	0 Pkt	0 Pkt	-84 dBm	0.14 V
1765530612	16 Pkt	4 Pkt	0 Pkt	-82 dBm	0.14 V
1765529881	11 Pkt	1 Pkt	0 Pkt	-83 dBm	0.12 V
1765529149	1 Pkt	0 Pkt	0 Pkt	-83 dBm	0.14 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)