SR8RJS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR8RJS-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx10min*	Rx1h*	EfTot*
1777142762	14.38 Volt	50 Pkt	50 Pkt	94 Pcnt
1777141862	14.38 Volt	30 Pkt	60 Pkt	94 Pcnt
1777140962	14.38 Volt	70 Pkt	60 Pkt	94 Pcnt
1777140063	14.38 Volt	130 Pkt	50 Pkt	94 Pcnt
1777139163	14.38 Volt	70 Pkt	30 Pkt	94 Pcnt
1777138263	14.38 Volt	40 Pkt	30 Pkt	94 Pcnt
1777137363	14.38 Volt	30 Pkt	20 Pkt	94 Pcnt
1777136463	14.38 Volt	30 Pkt	20 Pkt	94 Pcnt
1777135563	14.38 Volt	40 Pkt	30 Pkt	94 Pcnt
1777134663	14.38 Volt	30 Pkt	40 Pkt	94 Pcnt
1777133763	14.38 Volt	80 Pkt	50 Pkt	94 Pcnt
1777132863	14.38 Volt	90 Pkt	50 Pkt	94 Pcnt
1777131963	14.38 Volt	80 Pkt	50 Pkt	94 Pcnt
1777131063	14.38 Volt	60 Pkt	50 Pkt	94 Pcnt
1777130163	14.38 Volt	80 Pkt	50 Pkt	94 Pcnt
1777129263	14.38 Volt	50 Pkt	40 Pkt	94 Pcnt
1777128363	14.38 Volt	110 Pkt	40 Pkt	93 Pcnt
1777127463	14.38 Volt	50 Pkt	30 Pkt	93 Pcnt
1777126563	14.38 Volt	40 Pkt	30 Pkt	93 Pcnt
1777125663	14.38 Volt	60 Pkt	40 Pkt	93 Pcnt
1777124763	14.38 Volt	30 Pkt	40 Pkt	93 Pcnt
1777123863	14.38 Volt	50 Pkt	50 Pkt	93 Pcnt
1777122964	14.38 Volt	110 Pkt	50 Pkt	93 Pcnt
1777122064	14.38 Volt	70 Pkt	60 Pkt	92 Pcnt
1777121164	14.38 Volt	110 Pkt	80 Pkt	92 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx10min: 0, 10, 0

Rx1h: 0, 10, 0

DIG10m: 0, 1, 0

EfTot: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)