YM6KTK-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM6KTK-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RSSI*	Voltage*
1785316802	34 Pkt	-52 dBm	0.04 V
1785316072	22 Pkt	-57 dBm	0.04 V
1785315342	5 Pkt	-56 dBm	0.04 V
1785314612	5 Pkt	-49 dBm	0.04 V
1785313882	17 Pkt	-51 dBm	0.04 V
1785313152	25 Pkt	-50 dBm	0.04 V
1785312422	37 Pkt	-54 dBm	0.04 V
1785311692	11 Pkt	-53 dBm	0.04 V
1785310962	10 Pkt	-53 dBm	0.04 V
1785310232	4 Pkt	-54 dBm	0.04 V
1785309502	11 Pkt	-53 dBm	0.04 V
1785308772	14 Pkt	-51 dBm	0.04 V
1785308042	15 Pkt	-53 dBm	0.04 V
1785307312	34 Pkt	-52 dBm	0.04 V
1785306582	35 Pkt	-53 dBm	0.04 V
1785305852	32 Pkt	-53 dBm	0.04 V
1785305122	31 Pkt	-52 dBm	0.04 V
1785304392	32 Pkt	-50 dBm	0.04 V
1785303662	33 Pkt	-52 dBm	0.04 V
1785302932	28 Pkt	-53 dBm	0.04 V
1785302202	37 Pkt	-54 dBm	0.04 V
1785301472	32 Pkt	-51 dBm	0.04 V
1785300742	31 Pkt	-50 dBm	0.04 V
1785300012	34 Pkt	-54 dBm	0.04 V
1785299282	25 Pkt	-54 dBm	0.04 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)