KK7UHC-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KK7UHC-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1765520508	138 Pkts	135 Pkts	63 Pkts	23 C
1765516907	135 Pkts	131 Pkts	62 Pkts	23 C
1765513308	116 Pkts	115 Pkts	57 Pkts	24 C
1765509708	90 Pkts	88 Pkts	28 Pkts	23 C
1765506108	132 Pkts	125 Pkts	36 Pkts	24 C
1765502508	142 Pkts	138 Pkts	50 Pkts	24 C
1765498908	153 Pkts	147 Pkts	75 Pkts	24 C
1765495308	131 Pkts	127 Pkts	51 Pkts	24 C
1765491707	180 Pkts	177 Pkts	78 Pkts	25 C
1765488107	225 Pkts	221 Pkts	92 Pkts	25 C
1765484507	184 Pkts	179 Pkts	55 Pkts	24 C
1765480908	212 Pkts	210 Pkts	87 Pkts	24 C
1765477319	234 Pkts	232 Pkts	122 Pkts	24 C
1765473708	132 Pkts	128 Pkts	49 Pkts	23 C
1765470108	203 Pkts	198 Pkts	84 Pkts	22 C
1765466508	130 Pkts	126 Pkts	55 Pkts	22 C
1765462908	141 Pkts	137 Pkts	64 Pkts	21 C
1765455707	110 Pkts	107 Pkts	47 Pkts	22 C
1765452107	104 Pkts	100 Pkts	42 Pkts	22 C
1765448508	127 Pkts	122 Pkts	45 Pkts	22 C
1765444908	112 Pkts	104 Pkts	40 Pkts	22 C
1765441308	100 Pkts	96 Pkts	35 Pkts	21 C
1765437708	107 Pkts	104 Pkts	45 Pkts	23 C
1765434108	113 Pkts	109 Pkts	40 Pkts	22 C
1765430508	89 Pkts	86 Pkts	31 Pkts	22 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)