E22ZMG-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E22ZMG-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1776867353	59 ug/m3	79 ug/m3	80 ug/m3	-57 dBm	12.86 V
1776866729	58 ug/m3	78 ug/m3	83 ug/m3	-58 dBm	12.9 V
1776866100	58 ug/m3	77 ug/m3	85 ug/m3	-58 dBm	12.92 V
1776865474	57 ug/m3	76 ug/m3	79 ug/m3	-57 dBm	12.88 V
1776864848	63 ug/m3	85 ug/m3	91 ug/m3	-57 dBm	12.9 V
1776864223	63 ug/m3	82 ug/m3	86 ug/m3	-57 dBm	12.86 V
1776863597	68 ug/m3	88 ug/m3	94 ug/m3	-58 dBm	13.06 V
1776862972	60 ug/m3	83 ug/m3	85 ug/m3	-57 dBm	13.06 V
1776862344	60 ug/m3	77 ug/m3	79 ug/m3	-56 dBm	12.9 V
1776861718	58 ug/m3	75 ug/m3	78 ug/m3	-57 dBm	12.84 V
1776861092	56 ug/m3	75 ug/m3	79 ug/m3	-55 dBm	12.9 V
1776860467	59 ug/m3	78 ug/m3	82 ug/m3	-57 dBm	12.9 V
1776859841	57 ug/m3	78 ug/m3	80 ug/m3	-57 dBm	12.9 V
1776859215	57 ug/m3	76 ug/m3	83 ug/m3	-57 dBm	12.84 V
1776858589	57 ug/m3	75 ug/m3	83 ug/m3	-58 dBm	12.86 V
1776857964	59 ug/m3	78 ug/m3	85 ug/m3	-58 dBm	12.86 V
1776857338	58 ug/m3	77 ug/m3	79 ug/m3	-58 dBm	13.04 V
1776856711	59 ug/m3	79 ug/m3	84 ug/m3	-58 dBm	13.04 V
1776856083	59 ug/m3	76 ug/m3	80 ug/m3	-58 dBm	12.9 V
1776855457	60 ug/m3	81 ug/m3	87 ug/m3	-58 dBm	12.9 V
1776854830	56 ug/m3	75 ug/m3	79 ug/m3	-58 dBm	12.9 V
1776854203	56 ug/m3	76 ug/m3	81 ug/m3	-57 dBm	13.04 V
1776853577	60 ug/m3	82 ug/m3	85 ug/m3	-58 dBm	12.9 V
1776852943	55 ug/m3	69 ug/m3	77 ug/m3	-57 dBm	12.84 V
1776852311	56 ug/m3	74 ug/m3	77 ug/m3	-58 dBm	13.04 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)