OE3CZC-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3CZC-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1789941601	1002 hPa	30.1 C deg	41 %	1021.2 hPa	0 C deg
1789939786	1001.3 hPa	30.1 C deg	40.9 %	1020.4 hPa	0 C deg
1789937971	1001.3 hPa	30.1 C deg	41 %	1020.4 hPa	0 C deg
1789936156	1000.9 hPa	30.1 C deg	41 %	1020 hPa	0 C deg
1789934341	1000.9 hPa	30.1 C deg	41.1 %	1020 hPa	0 C deg
1789932526	1000.5 hPa	30 C deg	41.1 %	1019.6 hPa	0 C deg
1789930711	1000.7 hPa	30.1 C deg	41.2 %	1019.8 hPa	0 C deg
1789928895	1000.6 hPa	30.1 C deg	41.2 %	1019.7 hPa	0 C deg
1789927080	1000.4 hPa	30.1 C deg	41.2 %	1019.4 hPa	0 C deg
1789925265	1000.5 hPa	30 C deg	41.2 %	1019.5 hPa	0 C deg
1789923450	1000 hPa	29.8 C deg	41.2 %	1019.1 hPa	0 C deg
1789921635	1000.5 hPa	30 C deg	41.2 %	1019.6 hPa	0 C deg
1789919820	1000.6 hPa	30 C deg	41.2 %	1019.7 hPa	0 C deg
1789918005	1000.7 hPa	29.9 C deg	41.2 %	1019.8 hPa	0 C deg
1789916189	1000.8 hPa	29.9 C deg	41.3 %	1019.9 hPa	0 C deg
1789914374	1001.1 hPa	29.8 C deg	41.2 %	1020.2 hPa	0 C deg
1789912559	1001.4 hPa	29.8 C deg	41.2 %	1020.5 hPa	0 C deg
1789910744	1001.9 hPa	29.8 C deg	41.2 %	1021 hPa	0 C deg
1789908929	1002.3 hPa	29.7 C deg	41.2 %	1021.4 hPa	0 C deg
1789907114	1002.5 hPa	29.7 C deg	41.3 %	1021.6 hPa	0 C deg
1789905298	1002.7 hPa	29.8 C deg	41.2 %	1021.9 hPa	0 C deg
1789903483	1003.1 hPa	29.8 C deg	41.2 %	1022.3 hPa	0 C deg
1789901668	1003.5 hPa	29.8 C deg	41.2 %	1022.7 hPa	0 C deg
1789899853	1003.8 hPa	29.8 C deg	41.3 %	1022.9 hPa	0 C deg
1789898038	1004 hPa	29.8 C deg	41.4 %	1023.2 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)