BX4ACP-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BX4ACP-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	ALL_PKTS_10M*	FWD_APRS_10M*	POS_PKTS_10M*	CTRL_PKTS_10M*
1781864748	23 cnt	0 cnt	18 cnt	5 cnt
1781864080	6 cnt	0 cnt	5 cnt	1 cnt
1781863480	38 cnt	0 cnt	33 cnt	5 cnt
1781862880	30 cnt	1 cnt	29 cnt	1 cnt
1781862268	27 cnt	2 cnt	25 cnt	2 cnt
1781861668	35 cnt	2 cnt	29 cnt	6 cnt
1781861068	27 cnt	0 cnt	25 cnt	2 cnt
1781860468	27 cnt	0 cnt	24 cnt	3 cnt
1781859868	33 cnt	0 cnt	26 cnt	7 cnt
1781859268	20 cnt	0 cnt	16 cnt	4 cnt
1781858668	33 cnt	0 cnt	26 cnt	7 cnt
1781858068	8 cnt	0 cnt	6 cnt	2 cnt
1781857468	43 cnt	0 cnt	39 cnt	4 cnt
1781856868	8 cnt	1 cnt	8 cnt	0 cnt
1781856098	32 cnt	0 cnt	28 cnt	4 cnt
1781855497	29 cnt	0 cnt	28 cnt	1 cnt
1781854897	25 cnt	0 cnt	21 cnt	4 cnt
1781854297	46 cnt	1 cnt	42 cnt	4 cnt
1781853697	6 cnt	0 cnt	6 cnt	0 cnt
1781853028	21 cnt	0 cnt	18 cnt	3 cnt
1781852428	17 cnt	0 cnt	15 cnt	2 cnt
1781851828	27 cnt	0 cnt	26 cnt	1 cnt
1781851228	29 cnt	0 cnt	25 cnt	4 cnt
1781850628	35 cnt	0 cnt	28 cnt	7 cnt
1781850028	26 cnt	0 cnt	23 cnt	3 cnt

*Used Equation Coefficients:

ALL_PKTS_10M: 0, 1, 0

FWD_APRS_10M: 0, 1, 0

POS_PKTS_10M: 0, 1, 0

MSG_PKTS_10M: 0, 1, 0

CTRL_PKTS_10M: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)