DL4CH-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL4CH-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1776973008	1020.5 hPa	21.9 C deg	1024.4 hPa	0 C deg
1776971210	1020.5 hPa	21.9 C deg	1024.4 hPa	0 C deg
1776960389	1021.3 hPa	20.9 C deg	1025.2 hPa	0 C deg
1776879586	1023.8 hPa	21.4 C deg	1027.7 hPa	0 C deg
1776876019	1024.1 hPa	21.3 C deg	1028 hPa	0 C deg
1776874213	1024.2 hPa	20.9 C deg	1028.1 hPa	0 C deg
1776799104	1025.3 hPa	19.6 C deg	1029.2 hPa	0 C deg
1776797186	1025 hPa	19.5 C deg	1028.9 hPa	0 C deg
1776795353	1024.9 hPa	19.2 C deg	1028.8 hPa	0 C deg
1776793559	1024.6 hPa	19.1 C deg	1028.6 hPa	0 C deg
1776791684	1024.6 hPa	19.2 C deg	1028.5 hPa	0 C deg
1776788141	1024.5 hPa	19 C deg	1028.4 hPa	0 C deg
1776712687	1021.7 hPa	18.9 C deg	1025.7 hPa	0 C deg
1776710880	1021.2 hPa	18.8 C deg	1025.1 hPa	0 C deg
1776709034	1020.9 hPa	18.7 C deg	1024.8 hPa	0 C deg
1776705382	1020.4 hPa	18.3 C deg	1024.4 hPa	0 C deg
1776703578	1020.4 hPa	18.4 C deg	1024.3 hPa	0 C deg
1776701772	1020.1 hPa	18.2 C deg	1024.1 hPa	0 C deg
1776536356	1017 hPa	23.5 C deg	1020.9 hPa	0 C deg
1776531071	1017 hPa	22.5 C deg	1020.8 hPa	0 C deg
1776529426	1017 hPa	22.5 C deg	1020.9 hPa	0 C deg
1776527370	1017.2 hPa	22.5 C deg	1021.1 hPa	0 C deg
1776525642	1017.2 hPa	22.5 C deg	1021.1 hPa	0 C deg
1776523835	1017.5 hPa	22.4 C deg	1021.3 hPa	0 C deg
1776522068	1017.5 hPa	22.5 C deg	1021.4 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)