IK3ZXW-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IK3ZXW-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1777321173	14.03 Volt	620 Pkt	200 Pkt	58 Pcnt
1777321172	14.03 Volt	620 Pkt	200 Pkt	58 Pcnt
1777320872	14.03 Volt	640 Pkt	210 Pkt	58 Pcnt
1777320573	14.03 Volt	650 Pkt	210 Pkt	57 Pcnt
1777320572	14.03 Volt	650 Pkt	210 Pkt	57 Pcnt
1777320272	14.03 Volt	650 Pkt	210 Pkt	57 Pcnt
1777319976	14.03 Volt	660 Pkt	200 Pkt	56 Pcnt
1777319972	14.03 Volt	660 Pkt	200 Pkt	56 Pcnt
1777319672	14.03 Volt	670 Pkt	190 Pkt	55 Pcnt
1777319373	14.03 Volt	650 Pkt	190 Pkt	54 Pcnt
1777319372	14.03 Volt	650 Pkt	190 Pkt	54 Pcnt
1777319072	14.03 Volt	640 Pkt	180 Pkt	55 Pcnt
1777318773	14.03 Volt	630 Pkt	190 Pkt	53 Pcnt
1777318772	14.03 Volt	630 Pkt	190 Pkt	53 Pcnt
1777318472	14.03 Volt	630 Pkt	190 Pkt	54 Pcnt
1777318173	14.03 Volt	650 Pkt	190 Pkt	54 Pcnt
1777318172	14.03 Volt	650 Pkt	190 Pkt	54 Pcnt
1777317872	14.03 Volt	650 Pkt	200 Pkt	56 Pcnt
1777317573	14.03 Volt	600 Pkt	180 Pkt	56 Pcnt
1777317572	14.03 Volt	600 Pkt	180 Pkt	56 Pcnt
1777317272	14.03 Volt	530 Pkt	160 Pkt	56 Pcnt
1777316974	14.03 Volt	490 Pkt	150 Pkt	57 Pcnt
1777316972	14.03 Volt	490 Pkt	150 Pkt	57 Pcnt
1777316672	14.03 Volt	430 Pkt	130 Pkt	56 Pcnt
1777316373	14.03 Volt	380 Pkt	120 Pkt	58 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)