IR9W-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR9W-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*
1763783591	192 Count	227 Count	167 Count	4.12 VDC
1763783284	183 Count	215 Count	159 Count	4.22 VDC
1763783271	182 Count	215 Count	159 Count	4.11 VDC
1763782967	176 Count	206 Count	154 Count	4.2 VDC
1763782663	164 Count	193 Count	143 Count	4.21 VDC
1763782360	155 Count	184 Count	135 Count	4.2 VDC
1763782056	145 Count	172 Count	126 Count	4.15 VDC
1763781450	132 Count	154 Count	115 Count	4.19 VDC
1763781141	121 Count	143 Count	105 Count	4.19 VDC
1763780838	116 Count	135 Count	101 Count	4.13 VDC
1763780538	110 Count	129 Count	96 Count	4.12 VDC
1763780231	102 Count	120 Count	89 Count	4.13 VDC
1763779928	93 Count	109 Count	81 Count	4.14 VDC
1763779624	88 Count	103 Count	77 Count	4.14 VDC
1763779018	74 Count	88 Count	65 Count	4.18 VDC
1763778714	67 Count	82 Count	59 Count	4.21 VDC
1763778411	62 Count	76 Count	55 Count	4.14 VDC
1763778107	55 Count	67 Count	49 Count	4.16 VDC
1763777797	42 Count	52 Count	37 Count	4.18 VDC
1763777494	34 Count	42 Count	30 Count	4.16 VDC
1763777190	28 Count	37 Count	25 Count	4.2 VDC
1763776887	23 Count	30 Count	21 Count	4.21 VDC
1763776584	16 Count	23 Count	15 Count	4.16 VDC
1763775977	807 Count	1007 Count	688 Count	4.2 VDC
1763775681	800 Count	998 Count	682 Count	4.13 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)