Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object DL1BWU. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time Vin* Rx1h* Dg1h* Eff1h* Temp*
1761511422 13.98 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761506023 13.98 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761504223 13.9 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761502423 13.98 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761500633 13.9 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761498823 13.9 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761495223 13.98 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761493423 13.9 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761491623 13.98 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761480823 13.98 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761479023 13.98 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761477223 13.98 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761470024 13.98 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761468224 13.9 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761466424 13.98 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761464624 13.98 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761462824 13.98 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761461024 13.98 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761459225 13.98 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761457424 13.98 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761455624 13.98 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761453824 13.98 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761452024 13.98 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761450224 13.98 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
1761448424 13.98 Volt 0 Pkt 0 Pkt 100 Pcnt 0 C
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Temp: 0, 0, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)