HB9CMI-40 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HB9CMI-40. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1772546790	968.7 hPa	28 C deg	21.6 %	1023.1 hPa	0 C deg
1772544975	968.9 hPa	28.2 C deg	21.3 %	1023.3 hPa	0 C deg
1772544401	968.9 hPa	28.4 C deg	21.1 %	1023.3 hPa	0 C deg
1772542586	968.9 hPa	28.9 C deg	20.7 %	1023.2 hPa	0 C deg
1772540771	969.2 hPa	29.3 C deg	20 %	1023.4 hPa	0 C deg
1772540703	969.2 hPa	29.3 C deg	20 %	1023.4 hPa	0 C deg
1772539185	969.4 hPa	29.4 C deg	19.3 %	1023.6 hPa	0 C deg
1772537369	969.7 hPa	29.3 C deg	19.7 %	1023.9 hPa	0 C deg
1772537232	969.7 hPa	29.2 C deg	19.8 %	1023.9 hPa	0 C deg
1772535848	969.8 hPa	29.4 C deg	20.1 %	1024 hPa	0 C deg
1772535746	969.8 hPa	29.4 C deg	20.2 %	1024.1 hPa	0 C deg
1772535050	970 hPa	29.2 C deg	20 %	1024.2 hPa	0 C deg
1772534553	970.1 hPa	29.2 C deg	19.4 %	1024.3 hPa	0 C deg
1772533038	970.1 hPa	28.9 C deg	20.5 %	1024.4 hPa	0 C deg
1772532848	970.2 hPa	28.8 C deg	20.6 %	1024.5 hPa	0 C deg
1772532799	970.1 hPa	28.8 C deg	20.5 %	1024.5 hPa	0 C deg
1772532108	970.2 hPa	28.4 C deg	19.8 %	1024.6 hPa	0 C deg
1772531981	970.2 hPa	28.5 C deg	19.4 %	1024.6 hPa	0 C deg
1772531756	970.3 hPa	28.7 C deg	21 %	1024.6 hPa	0 C deg
1772528527	970.3 hPa	27.5 C deg	22.6 %	1024.9 hPa	0 C deg
1772526863	970.2 hPa	26.8 C deg	23.6 %	1025 hPa	0 C deg
1772525048	970.1 hPa	25.6 C deg	24.3 %	1025 hPa	0 C deg
1772524613	970 hPa	25.4 C deg	24.7 %	1025 hPa	0 C deg
1772523916	970 hPa	25 C deg	25.3 %	1025 hPa	0 C deg
1772522099	969.8 hPa	23.9 C deg	27.2 %	1025.1 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)