LU4ETM-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU4ETM-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1781377830	13 Pkt	0 Pkt	31 dBm	11.24 V
1781377455	18 Pkt	2 Pkt	31 dBm	11.24 V
1781377080	28 Pkt	1 Pkt	31 dBm	11.26 V
1781376702	18 Pkt	0 Pkt	31 dBm	11.24 V
1781376327	38 Pkt	0 Pkt	31 dBm	11.24 V
1781375948	38 Pkt	0 Pkt	31 dBm	11.26 V
1781375570	36 Pkt	1 Pkt	31 dBm	11.24 V
1781375104	30 Pkt	0 Pkt	31 dBm	11.24 V
1781374727	34 Pkt	0 Pkt	31 dBm	11.24 V
1781374349	22 Pkt	3 Pkt	31 dBm	11.24 V
1781373974	14 Pkt	0 Pkt	31 dBm	11.26 V
1781373599	31 Pkt	2 Pkt	31 dBm	11.24 V
1781373222	29 Pkt	0 Pkt	31 dBm	11.26 V
1781372845	26 Pkt	0 Pkt	31 dBm	11.26 V
1781372469	23 Pkt	2 Pkt	31 dBm	11.24 V
1781372002	11 Pkt	2 Pkt	31 dBm	11.24 V
1781371627	16 Pkt	2 Pkt	31 dBm	11.24 V
1781371253	10 Pkt	0 Pkt	31 dBm	11.24 V
1781370887	17 Pkt	0 Pkt	31 dBm	11.24 V
1781370505	13 Pkt	1 Pkt	31 dBm	11.24 V
1781370130	13 Pkt	1 Pkt	31 dBm	11.24 V
1781369755	24 Pkt	2 Pkt	31 dBm	11.24 V
1781369380	19 Pkt	1 Pkt	31 dBm	11.24 V
1781368916	24 Pkt	0 Pkt	31 dBm	11.24 V
1781368541	22 Pkt	4 Pkt	31 dBm	11.24 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)