ED3YAW-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ED3YAW-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	V1-2P*	V2-3P*	TEMP*
1784674375	1183.2 V-DC	1193.4 V-DC	21 GRADOS
1784672575	1193.4 V-DC	1193.4 V-DC	20.5 GRADOS
1784669871	1193.4 V-DC	1203.6 V-DC	20.5 GRADOS
1784668970	1203.6 V-DC	1203.6 V-DC	20 GRADOS
1784668071	1203.6 V-DC	1203.6 V-DC	19.5 GRADOS
1784665366	1213.8 V-DC	1213.8 V-DC	19 GRADOS
1784662664	1224 V-DC	1224 V-DC	20.5 GRADOS
1784661763	1224 V-DC	1234.2 V-DC	21.5 GRADOS
1784659062	1244.4 V-DC	1244.4 V-DC	24 GRADOS
1784657259	1264.8 V-DC	1264.8 V-DC	25 GRADOS
1784653655	1285.2 V-DC	1285.2 V-DC	27 GRADOS
1784652755	1285.2 V-DC	1295.4 V-DC	28.5 GRADOS
1784651853	1295.4 V-DC	1295.4 V-DC	30.5 GRADOS
1784650953	1295.4 V-DC	1295.4 V-DC	31 GRADOS
1784646450	1326 V-DC	1326 V-DC	30.5 GRADOS
1784645547	1326 V-DC	1326 V-DC	32 GRADOS
1784644646	1346.4 V-DC	1356.6 V-DC	29.5 GRADOS
1784642848	1336.2 V-DC	1336.2 V-DC	29 GRADOS
1784641946	1336.2 V-DC	1336.2 V-DC	29 GRADOS
1784641047	1346.4 V-DC	1356.6 V-DC	29.5 GRADOS
1784640142	1356.6 V-DC	1356.6 V-DC	31.5 GRADOS
1784639244	1356.6 V-DC	1366.8 V-DC	30.5 GRADOS
1784638340	1356.6 V-DC	1366.8 V-DC	30 GRADOS
1784636539	1366.8 V-DC	1366.8 V-DC	30.5 GRADOS
1784635638	1366.8 V-DC	1366.8 V-DC	31.5 GRADOS

*Used Equation Coefficients:

V1-2P: 0, 10.2, 0

V2-3P: 0, 10.2, 0

TEMP: 0, 0.5, -65

A4: 0, 0, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)