DK1RKO-20 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DK1RKO-20. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1787553798	1018.1 hPa	27.2 C deg	33.9 %	1024.8 hPa	0 C deg
1787519290	1016.4 hPa	24.9 C deg	26.5 %	1023.2 hPa	0 C deg
1787517475	1016.4 hPa	24.4 C deg	26.5 %	1023.2 hPa	0 C deg
1787515659	1016.4 hPa	25.2 C deg	25.6 %	1023.1 hPa	0 C deg
1787513844	1016.3 hPa	26 C deg	24.5 %	1023 hPa	0 C deg
1787512028	1016.2 hPa	27 C deg	23.2 %	1022.9 hPa	0 C deg
1787510212	1015.8 hPa	28.6 C deg	21.1 %	1022.5 hPa	0 C deg
1787508397	1015.9 hPa	30.9 C deg	19.2 %	1022.5 hPa	0 C deg
1787074578	1000.4 hPa	26.1 C deg	44.8 %	1007.3 hPa	0 C deg
1787072763	1000.5 hPa	26.5 C deg	45 %	1007.3 hPa	0 C deg
1787070948	1000.3 hPa	26.5 C deg	45.5 %	1007.2 hPa	0 C deg
1787069133	1000.5 hPa	26.2 C deg	44.4 %	1007.3 hPa	0 C deg
1787067318	1000.5 hPa	26.3 C deg	44 %	1007.4 hPa	0 C deg
1787065502	1000.5 hPa	26.3 C deg	42.4 %	1007.4 hPa	0 C deg
1786933564	1006.8 hPa	27.9 C deg	25.8 %	1013.6 hPa	0 C deg
1786846617	1009.7 hPa	27.2 C deg	31.3 %	1016.6 hPa	0 C deg
1786763097	1006.4 hPa	30.9 C deg	20.3 %	1013.2 hPa	0 C deg
1786754018	1006.8 hPa	34 C deg	16.5 %	1013.6 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)