VK2GJ-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vbat*	Psys*	Temp*	AirP*
1765581188	4 V	300 mW	30.4 degC	99712.5 Pa
1765581184	4 V	258 mW	30.3 degC	99712.5 Pa
1765581126	4 V	262 mW	30.1 degC	99712.5 Pa
1765581059	4 V	268 mW	29.8 degC	99712.5 Pa
1765580983	3.99 V	222 mW	29.7 degC	99712.5 Pa
1765580925	4 V	264 mW	30 degC	99712.5 Pa
1765580871	4 V	276 mW	29.8 degC	99712.5 Pa
1765580806	4 V	280 mW	30 degC	99712.5 Pa
1765580804	4 V	258 mW	29.9 degC	99712.5 Pa
1765580735	4 V	400 mW	30.7 degC	99712.5 Pa
1765580674	4 V	274 mW	29.7 degC	99712.5 Pa
1765580602	4 V	398 mW	30.8 degC	99712.5 Pa
1765580559	4 V	286 mW	30.2 degC	99712.5 Pa
1765580438	4 V	260 mW	29.5 degC	99712.5 Pa
1765580400	4 V	258 mW	29.6 degC	99725 Pa
1765580335	4 V	254 mW	29.5 degC	99725 Pa
1765580283	4 V	252 mW	29.7 degC	99712.5 Pa
1765580202	4 V	288 mW	29.6 degC	99725 Pa
1765580145	4 V	254 mW	29.8 degC	99725 Pa
1765580109	4 V	286 mW	30.2 degC	99725 Pa
1765580074	4 V	230 mW	30.1 degC	99725 Pa
1765580003	4 V	372 mW	30.8 degC	99712.5 Pa
1765579956	4 V	316 mW	30.4 degC	99725 Pa
1765579855	4 V	282 mW	29.8 degC	99725 Pa
1765579791	4 V	244 mW	30.1 degC	99725 Pa

*Used Equation Coefficients:

Vbat: 0, 0.001, 0

Vsol: 0, 0.001, 0

Psys: 0, 2, 0

Temp: 0, 0.1, -100

AirP: 0, 12.5, 500

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)