DK1TCP-77 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DK1TCP-77. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1765553440	971.6 hPa	19.9 C deg	1028.9 hPa	0 C deg
1765549976	971.6 hPa	20.1 C deg	1028.9 hPa	0 C deg
1765548000	971.6 hPa	19.7 C deg	1028.9 hPa	0 C deg
1765547874	971.5 hPa	19.7 C deg	1028.9 hPa	0 C deg
1765547691	971.5 hPa	19.7 C deg	1028.9 hPa	0 C deg
1765546048	971.4 hPa	19.6 C deg	1028.8 hPa	0 C deg
1765544236	971.5 hPa	19.5 C deg	1029 hPa	0 C deg
1765542823	971.5 hPa	19.6 C deg	1028.9 hPa	0 C deg
1765530413	972.4 hPa	19.6 C deg	1029.9 hPa	0 C deg
1765528598	972.1 hPa	18.2 C deg	1029.8 hPa	0 C deg
1765526783	972.1 hPa	16.8 C deg	1030.1 hPa	0 C deg
1765526564	972 hPa	16.7 C deg	1030 hPa	0 C deg
1765525962	971.8 hPa	16.3 C deg	1029.9 hPa	0 C deg
1765479506	971.4 hPa	23.7 C deg	1027.9 hPa	17.8 C deg
1765478540	0 hPa	0 C deg	0 hPa	17.8 C deg
1765363144	0 hPa	0 C deg	0 hPa	16.5 C deg
1765352897	0 hPa	0 C deg	0 hPa	15.1 C deg
1765352897	0 hPa	0 C deg	0 hPa	15.1 C deg
1765337777	0 hPa	0 C deg	0 hPa	15.5 C deg
1765337776	0 hPa	0 C deg	0 hPa	15.5 C deg
1765335971	0 hPa	0 C deg	0 hPa	15.6 C deg
1765335970	0 hPa	0 C deg	0 hPa	15.6 C deg
1765332336	0 hPa	0 C deg	0 hPa	15.6 C deg
1765332336	0 hPa	0 C deg	0 hPa	15.6 C deg
1765330523	0 hPa	0 C deg	0 hPa	15.8 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)