K7OWW-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K7OWW-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TempIn*	Volt*	Rx1h*	Eff1h*
1773374192	49.3 F	13.58 Volt	50 Pkt	94 Pcnt
1773352593	48.4 F	13.58 Volt	90 Pkt	97 Pcnt
1773300395	46.6 F	13.58 Volt	50 Pkt	90 Pcnt
1773298595	47.5 F	13.58 Volt	60 Pkt	92 Pcnt
1773289595	47.5 F	13.58 Volt	80 Pkt	95 Pcnt
1773285995	47.5 F	13.58 Volt	50 Pkt	96 Pcnt
1773284195	48.4 F	13.58 Volt	50 Pkt	91 Pcnt
1773282395	47.5 F	13.58 Volt	50 Pkt	93 Pcnt
1773278795	47.5 F	13.58 Volt	50 Pkt	87 Pcnt
1773273395	47.5 F	13.58 Volt	40 Pkt	95 Pcnt
1773267996	47.5 F	13.58 Volt	40 Pkt	95 Pcnt
1773266196	46.6 F	13.58 Volt	50 Pkt	92 Pcnt
1773264396	47.5 F	13.58 Volt	40 Pkt	82 Pcnt
1773246396	44.8 F	13.58 Volt	40 Pkt	85 Pcnt
1773242797	45.7 F	13.58 Volt	40 Pkt	87 Pcnt
1773237397	45.7 F	13.5 Volt	40 Pkt	67 Pcnt
1773233796	45.7 F	13.58 Volt	40 Pkt	77 Pcnt
1773231997	44.8 F	13.58 Volt	40 Pkt	69 Pcnt
1773230197	47.5 F	13.58 Volt	40 Pkt	66 Pcnt
1773228397	45.7 F	13.58 Volt	40 Pkt	67 Pcnt
1773226597	44.8 F	13.58 Volt	40 Pkt	61 Pcnt
1773224797	46.6 F	13.58 Volt	40 Pkt	58 Pcnt
1773222997	45.7 F	13.58 Volt	40 Pkt	58 Pcnt
1773221197	47.5 F	13.58 Volt	40 Pkt	61 Pcnt
1773219397	45.7 F	13.58 Volt	40 Pkt	69 Pcnt

*Used Equation Coefficients:

TempIn: 0, 0.9, -83

Volt: 0, 0.075, 0

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)