GCGH-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object GCGH-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1781388322	13.95 Volt	760 Pkt	100 Pkt	75 Pcnt
1781382917	13.88 Volt	620 Pkt	100 Pkt	64 Pcnt
1781377540	13.8 Volt	620 Pkt	110 Pkt	66 Pcnt
1781366702	13.95 Volt	840 Pkt	110 Pkt	72 Pcnt
1781361296	13.73 Volt	920 Pkt	110 Pkt	66 Pcnt
1781355892	14.1 Volt	1210 Pkt	110 Pkt	78 Pcnt
1781345081	14.1 Volt	1030 Pkt	110 Pkt	76 Pcnt
1781339676	14.1 Volt	1030 Pkt	110 Pkt	80 Pcnt
1781334272	14.18 Volt	980 Pkt	110 Pkt	80 Pcnt
1781328865	14.18 Volt	930 Pkt	120 Pkt	79 Pcnt
1781323461	14.18 Volt	870 Pkt	120 Pkt	81 Pcnt
1781318056	14.18 Volt	820 Pkt	110 Pkt	80 Pcnt
1781312651	14.18 Volt	660 Pkt	110 Pkt	76 Pcnt
1781307245	14.1 Volt	590 Pkt	110 Pkt	67 Pcnt
1781296435	13.95 Volt	640 Pkt	100 Pkt	66 Pcnt
1781291030	13.95 Volt	630 Pkt	100 Pkt	64 Pcnt
1781285625	14.03 Volt	650 Pkt	90 Pkt	64 Pcnt
1781280241	14.1 Volt	740 Pkt	90 Pkt	66 Pcnt
1781269410	14.18 Volt	1110 Pkt	90 Pkt	68 Pcnt
1781258599	14.18 Volt	750 Pkt	80 Pkt	67 Pcnt
1781253194	14.18 Volt	650 Pkt	90 Pkt	69 Pcnt
1781247788	14.1 Volt	490 Pkt	90 Pkt	72 Pcnt
1781242384	13.95 Volt	460 Pkt	90 Pkt	67 Pcnt
1781236979	13.8 Volt	490 Pkt	90 Pkt	70 Pcnt
1781231574	13.95 Volt	420 Pkt	100 Pkt	68 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)