PI1LDN Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PI1LDN. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1776679611	12.75 Volt	160 Pkt	50 Pkt	95 Pcnt
1776679311	12.75 Volt	150 Pkt	40 Pkt	96 Pcnt
1776679011	12.75 Volt	160 Pkt	40 Pkt	85 Pcnt
1776678711	12.75 Volt	170 Pkt	40 Pkt	83 Pcnt
1776678411	12.75 Volt	160 Pkt	40 Pkt	78 Pcnt
1776678111	12.75 Volt	150 Pkt	30 Pkt	70 Pcnt
1776677811	12.75 Volt	160 Pkt	30 Pkt	66 Pcnt
1776677511	12.75 Volt	170 Pkt	30 Pkt	63 Pcnt
1776677211	12.75 Volt	170 Pkt	20 Pkt	61 Pcnt
1776676911	12.68 Volt	160 Pkt	20 Pkt	60 Pcnt
1776676611	12.75 Volt	160 Pkt	20 Pkt	60 Pcnt
1776676311	12.53 Volt	150 Pkt	20 Pkt	59 Pcnt
1776676011	12.75 Volt	150 Pkt	20 Pkt	58 Pcnt
1776675714	12.75 Volt	130 Pkt	20 Pkt	57 Pcnt
1776675411	12.75 Volt	130 Pkt	20 Pkt	60 Pcnt
1776675111	12.75 Volt	140 Pkt	20 Pkt	57 Pcnt
1776674811	12.75 Volt	150 Pkt	20 Pkt	59 Pcnt
1776674511	12.68 Volt	160 Pkt	20 Pkt	61 Pcnt
1776674211	12.75 Volt	160 Pkt	20 Pkt	60 Pcnt
1776673911	12.75 Volt	160 Pkt	20 Pkt	63 Pcnt
1776673611	12.75 Volt	160 Pkt	20 Pkt	64 Pcnt
1776673311	12.75 Volt	160 Pkt	20 Pkt	64 Pcnt
1776673011	12.75 Volt	160 Pkt	20 Pkt	65 Pcnt
1776672711	12.75 Volt	160 Pkt	20 Pkt	65 Pcnt
1776672411	12.75 Volt	160 Pkt	20 Pkt	64 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

DgRxT: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)