IU7URP-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IU7URP-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1776669666	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776668766	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776667866	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776666966	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776666066	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776665165	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776664265	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776663365	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776662465	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776661565	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776660665	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776659765	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776658865	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776657965	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776657065	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776656165	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776655265	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776654364	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776653464	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776652564	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776651664	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776650764	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776649864	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776648964	0 Count	0 Count	0 Count	0 VDC	0 VDC
1776648064	0 Count	0 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)