OR7F-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OR7F-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Satelites*	Battery*	Temperature*	Humidity*
1785332218	14 Nr	12.23 Vdc	28.66 deg.C	41 %
1785328617	15 Nr	12.23 Vdc	27.36 deg.C	42 %
1785325020	15 Nr	12.23 Vdc	26.06 deg.C	43 %
1785317817	17 Nr	12.25 Vdc	23.46 deg.C	46 %
1785314212	15 Nr	12.25 Vdc	22.32 deg.C	51 %
1785310609	14 Nr	12.27 Vdc	21.52 deg.C	57 %
1785307010	14 Nr	12.27 Vdc	21.24 deg.C	59 %
1785303410	16 Nr	12.27 Vdc	21.62 deg.C	55 %
1785299809	10 Nr	12.27 Vdc	22.42 deg.C	53 %
1785296210	16 Nr	12.27 Vdc	23.38 deg.C	53 %
1785289010	15 Nr	12.29 Vdc	25.58 deg.C	51 %
1785285412	17 Nr	12.29 Vdc	26.8 deg.C	50 %
1785281810	13 Nr	12.3 Vdc	28.06 deg.C	49 %
1785278205	8 Nr	12.29 Vdc	29.32 deg.C	47 %
1785274603	15 Nr	12.29 Vdc	30.52 deg.C	45 %
1785270995	17 Nr	12.29 Vdc	31.56 deg.C	42 %
1785263786	17 Nr	12.29 Vdc	32.46 deg.C	38 %
1785252978	10 Nr	12.3 Vdc	28.06 deg.C	36 %
1785238563	15 Nr	12.34 Vdc	21.56 deg.C	45 %
1785231365	17 Nr	12.34 Vdc	19.32 deg.C	49 %
1785227762	15 Nr	12.35 Vdc	18.42 deg.C	53 %
1785213355	10 Nr	12.39 Vdc	18.16 deg.C	53 %
1785206147	8 Nr	12.39 Vdc	19.7 deg.C	53 %
1785202548	15 Nr	12.39 Vdc	20.62 deg.C	53 %
1785195340	9 Nr	12.41 Vdc	22.8 deg.C	52 %

*Used Equation Coefficients:

Satelites: 0, 1, 0

Battery: 0, 0.01, 0

Temperature: 0, 0.02, -50

Humidity: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)