SQ6OCN-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ6OCN-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1772587201	46 Deg.C	2 %
1772586605	47 Deg.C	2 %
1772586001	46 Deg.C	2 %
1772585402	47 Deg.C	2 %
1772584202	46 Deg.C	2 %
1772583001	47 Deg.C	2 %
1772581801	46 Deg.C	2 %
1772581202	47 Deg.C	2 %
1772580605	46 Deg.C	2 %
1772580002	46 Deg.C	2 %
1772579405	47 Deg.C	2 %
1772578801	46 Deg.C	2 %
1772578205	46 Deg.C	2 %
1772577602	47 Deg.C	2 %
1772577002	46 Deg.C	2 %
1772576405	46 Deg.C	2 %
1772575801	47 Deg.C	2 %
1772575206	46 Deg.C	2 %
1772574005	46 Deg.C	2 %
1772573402	45 Deg.C	2 %
1772572205	47 Deg.C	2 %
1772571601	46 Deg.C	2 %
1772571006	46 Deg.C	2 %
1772570405	46 Deg.C	2 %
1772569808	46 Deg.C	2 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)